Let's start with a set of **:ReticleIt's the most intuitive safety on the highway"Yardstick".One but, do you really recognize them? What is the role and significance of each of them?
01 Deflector line
The diversion line is generally set at the highway ramp, for:White V-shaped or diagonal lines, also called "shunt nose" and "shunt island", is a kind of forbidden marking, usedRemind the driver of the lane change ahead and the road conditions changeto guide the vehicles to go their own way and drive according to the prescribed route.
AsMarking is prohibited, the area.
Do not press the line or cross the line
It is also forbidden to stop or reverse
Any kind of behavior can cause a traffic accident.
So when you go over the diversion line.
Already completely missed the next station intersection.
Then it would be wrong
Drive to the next junction and exit the highway and turn back
02 Acceleration and deceleration lane lines
The acceleration and deceleration lane line separates the carriageway from the ramp when entering and exiting the rampEncrypted bold white lane separation dotted line, generally 300 to 500 meters in length. When a vehicle exits or enters a highway, or before entering or exiting a ramp, it is necessary to:Enter the acceleration and deceleration lane through the acceleration and deceleration lane lines in advanceto adjust the speed of the vehicle and make a safe transition.
Remember!
For your safety and the safety of others.
Whether driving in or out of high speed.
Do not change lanes across multiple lanes
Otherwise, the consequences are serious!
Right to do:
When youPrepare to enter the ramp and exit the highwaypleaseTurn on your right turn signal to warn of oncoming trafficto make a natural transition from the carriageway into the deceleration lane.
When you are in the rampGet ready to drive onto the high-speed main linepleaseTurn on your left turn signal in advance, increase your speed, and keep an eye out for oncoming trafficto merge into the carriageway while ensuring safety.
03 Lane Separation Solid
The solid line of the highway separation isSolid white lineIt is mostly set up between tunnels, bridges and lanes in accident-prone sections, and is one of the prohibited markings.
Motor vehicles are prohibited from changing lanes on the compaction line on the highwayWhen the vehicle that changes lanes on the compaction line occupies the lane in the same direction, the vehicle behind cannot overtake, and if it overtakes, it is easy to collide with the car, causing an accident.
In particular, large passenger and freight vehicles in the process of changing lanes, will have a certain impact on the driving vision and speed of the rear vehiclesIt is very easy to cause traffic accidents such as rear-end collisions and scrapes
While driving, when you see the "Lane Separation Solid".
Remember:The solid line prohibits vehicles from crossing
Especially on highways.
Bridges, tunnels, ramps, and intersections are driven into sections
Be careful not to crimp or cross
04 Deceleration marking
Lateral deceleration reticle
YesA set of white markings perpendicular to the centerline of the road, commonly found on curves, downhills, tunnel mouths and ramp crossings.
Longitudinal deceleration reticle
Parallel to the lane demarcation line, it is mostly a diamond-shaped block dotted line, there will be a sense of visual oppression when passing.
The deceleration markings are set according to the specific environment and the lessons learned from the accidentBe sure to slow down as you pass
Encounter a deceleration marker while drivingInstructions are about to arriveTunnels, bridges, steep slopes, etcSpecial road conditions and accident-prone road sectionsPlease remember to slow down at the same timePay attention to the changes in the speed limit value of the speed limit signs along the route
05 Visual Misalignment Line
Trompe l'oeil reticle is generally setBefore entering and exiting the tunnel, it is visually felt that the road ahead is narrowing, the role is to alert the driverSlow down and move in and out of the tunnelto avoid accidents caused by the influence of light differences.
Warm reminder of Shu millet.
There is a light difference in the entrance and exit tunnels
When you're close to a visual dislocation line.
Remember to take off your sunglasses and turn on your headlights
Control your speed and drive cautiously
06 Oscillating reticle
Oscillating reticles are divided into:Available in white and yellow, mostly occurs on long downhills, curves, tunnel entrances and accident-prone sections, when vehicles pass byThere is a strong sense of oscillation, while prompting the driver to slow downIt also has a strong reminder effect on fatigue driving
Oscillating reticle as importantWarning markings
It is usually set in a more dangerous section.
So, when you drive a vehicle by.
Be sure to slow down
Concentrate and drive carefully!
Finally, Shu Huang will tell you one more.
Useful knowledge
Lane demarcationEach section of the dotted line is 6 meters long and spaced 9 meters apartWhen the vehicle breaks down, the warning triangle must be set up 150 meters behind the vehicleParagraph 10Dotted lineLater on, you can.
Shu Huang solemnly emphasized.
When driving on the highway.
Please concentrate and follow the rules.
It is necessary to drive in strict accordance with the road traffic markings
Do not change lanes or occupy the road at will
Recommended in the past.
E-A66**7, E-W51**0 ....Penalize!
Do you understand the date of A, B, and C driver's licenses?