The plastic sintered plate dust collector is an efficient and environmentally friendly dust removal equipment, and its principle is mainly based on the principle of filtration. The sintered plate dust collector is composed of a plurality of sintered plate units, each of which has many tiny holes, and the size of these holes is smaller than the dust particles, so when the gas containing dust passes through the sintered plate unit, the dust particles are blocked outside the holes, so as to achieve the separation of dust and gas.
The working process of the plastic sintered plate dust collector is as follows: the dusty gas first enters the plastic sintered plate dust collector through the inlet pipe, and under the action of the gas distribution device, the gas evenly passes through each plastic sintered plate unit. Due to the small size of the holes in the sintered board unit, dust particles cannot enter the inside of the sintered board through the holes, but form a layer of filter cake on the outside of the holes. Over time, the thickness of the cake gradually increases, but the air permeability of the cake is still very good, so the gas can pass through the cake and into the clean gas outlet pipe.
The advantages of the sintered plate dust collector are its efficient dust removal performance and long life. Due to the small hole size of the sintered plate unit, many fine dust particles can be removed, so its dust removal efficiency is very high. In addition, due to the high hardness and wear resistance of the material of the plastic soldering unit, it has a long life and can be used for a long time without the need to replace.
In general, the plastic sintered plate dust collector is an efficient and environmentally friendly dust removal equipment, and its principle is based on the principle of filtration, and the separation of dust and gas is achieved through multiple plastic sintered plate units. Its advantages lie in its efficient dust removal performance and long life, and it can be widely used in various industrial fields.