If there is anything unspeakable behind the glamorous "Apple Family Bucket" users, it must be the problem of charging. Imagine this: in the morning, a first-time family bucket user holds an iPhone 15 Pro, an iPad, Apple Watch Ultra and AirPods Pro on his hands and ears respectively into a "Xing Mouke" coffee shop, full of social status, and then spends a fulfilling workday. At night, it's time to replenish the power of various devices before going to bed, so I keep looking for wires in the mess of wires, using Type-C for mobile phones and tablets, lightning for headphones, and special chargers for watches, plugging them in and then going to sleep. Such a scene can be described as quite inelegant.
So at this time, it is the turn of Belkin, a third-party manufacturer certified by Apple, to appear. In response to the problems encountered by these family bucket users, Belkin has thoughtfully launched a number of two-in-one.
1. The three-in-one wireless charger solves the "old and difficult" problem of complicated wires for Apple users. Now that the update of the wireless charging protocol QI2 is ushering in, the new Belkin QI2 2-in-1 wireless magnetic charging pad has also been launched, so let's take a look.
The QI protocol was released by the Wireless Charging Alliance WPC in 2008, aiming to unify the specification, so that cross-brand electronic devices can also be wirelessly charged through the same protocol "handshake", and after activation, different power is allocated according to different devices, such as iPhone can reach 7The power of 5W is from 5-15W for Android phones.
Over the years, QI has successfully fulfilled its historic mission. But after long-term use, Qi also exposed problems. For example, many times you need to "guess" whether the mobile phone is placed on the charging coil, the charging position is not clear enough, and the power is too low, and the charging efficiency is low. Therefore, the launch of QI2 is to solve these problems.
First of all, in terms of power, the QI2 can trigger up to 15W charging power in iPhone Android phones, which is twice as much as the previous QI for iPhone users, and the charging efficiency has been greatly improved. As for the problem of charging position, QI2 fully refers to Apple's excellent MagSafe design, requiring that the supported device needs to add a magnetic ring, so that it can be fitted with one stick, and there is no need to "blind guess". Of course, this is also inseparable from Apple's efforts in developing the QI2 standard, and good design should be shared together.
Eyes back to this Belkin QI2 2-in-1 wireless magnetic charging pad, QI2 blessing it, it seems more epoch-making. What I got in my hands was the starlight white color scheme, which combined with the similar design language that Belkin has been with Apple for many years, and the overall look is simple, high-end, and fruity. In terms of overall shape design, its outer edge is rounded, and the charging panel area is concave, and the charging area of the device is divided by two circular areas that are convex and concave. A protruding piece makes it easier to remove the charging phone, while a recessed area makes your AirPods more stable and beautiful.
Seeing this, some people may want to ask, what about the good family bucket user solution? Apple Watch obviously has no place! Don't worry, in addition to the two obvious wireless charging spots, the Belkin QI2 2-in-1 Wireless Magnetic Charging Pad also has a dedicated port for Apple Watch chargers on the side, which can be connected to charge three devices.
In this way, you only need to bind the charger of the watch to the charging pad for a long time, and then let the charging pad be placed on the bedside table to connect the power, so as to say goodbye to the messy wires and successfully unlock the wireless energy replenishment experience. However, with 15W power for mobile phones, 5W power for headphones, and 5W power for watches, you need to prepare a charging head with 30W or more power to power it.
The two-in-one design actually takes into account the portability. This Belkin QI2 2-in-1 Wireless Magnetic Charging Pad weighs only 303g, which is larger than the iPhone 15 Pro, and it only feels small and delicate when held in one hand. If it is made into a three-in-one, it may be difficult to maintain the volume. If you want to continue the wireless experience while traveling, you can simply leave a small space in your bag. And as mentioned earlier, Android phones can also be a bonus here, and if your travel companion uses an Android phone, then it comes in handy.
Not to mention is Belkin's built-in monitoring module in this product. This monitoring module can monitor the temperature in real time to reduce the impact of overheating on the life of the phone. At the same time, this monitoring module also has the functions of overvoltage protection and foreign object detection, which brings you sufficient protection. In addition, Belkin also provides users with $2,500 equipment insurance, so to speak, buy Belkin products, peace of mind and be done.
To sum up, this Belkin QI2 2-in-1 wireless charging pad brings a new and upgraded QI2 standard, which not only has higher charging efficiency, but also makes charging in one go and makes people feel comfortable. In terms of product quality, design style and ease of use, it is still Belkin's consistent high-end level, which can be called "in-situ cup evolution". For those of you who use Apple's family bucket, this Belkin QI2 2-in-1 wireless charging pad is a choice you should not miss.
2024 Travel Guide