Syringe self-destruct characteristic pressure tester, self-destruct characteristic tester
Syringe self-destruct characteristic pressure tester, self-destruct characteristic testerUse.
A syringe pressure testing device is a device used to test whether a syringe will self-destruct when subjected to pressure. The main purpose of this equipment is to ensure that the syringe can operate safely when subjected to normal or unexpected pressure loads to prevent accidents and injuries. Here are the possible uses of the device:
Medical device quality control: In the medical industry, syringes are one of the common medical devices. The use of a self-destruct characteristic pressure tester ensures that the syringe can operate safely when subjected to normal use pressure, reducing the risk of medical malpractice and patient injury due to syringe self-destruct.
Drug development and manufacturing: Drug development and production involves the use of syringes to deliver drugs. By using a self-destruct characteristic pressure tester, the durability and safety of the syringe under different pressure conditions can be evaluated, ensuring the reliability and safety of drug delivery.
Medical Device Chain Management: Self-destruct characteristic pressure testers can be used to check that syringes in the medical device chain meet quality standards. This helps to ensure that syringes in the ** chain meet the specified quality requirements and reduces the potential risks associated with low-quality syringes.
Safety: Self-destruct characteristic pressure testers can also be used to ensure that syringes can self-destruct if they are subjected to improper use or malicious modifications.
Syringe self-destruct characteristic pressure tester, self-destruct characteristic testerExecutive standard: YY T05733-2019
Syringe self-destruct characteristic pressure tester, self-destruct characteristic testerTechnical Parameters:
Control system: plc;
Operation interface: color 7-inch touch screen, Chinese and English switching;
High-precision motor, high-precision ball screw;
1 set of special fixtures suitable for various models;
Embedded printers, thermal printers;
Syringe self-destruct characteristic pressure tester, self-destruct characteristic testerTest method for self-destruct characteristics.
1 Principle. Under normal use, the full dose or test water (a.) is delivered in the full part of the dose or test water (a1.2.3) After that, use a test device or pressure device to pull the core rod out of the jacket. Measure and record the force that pulls out or breaks the core rod.
2 devices. e.1. A device that applies an axial tension force, and when the core rod is moved at a speed of 100mm min, the maximum force can reach 100ne
e.2. A device that applies pressure can increase the pressure at a rate of about 100 kpa min up to 300 kpa.
3 steps. e.1 Deliver the full dose or test water under normal use conditions. Use the test setup;
e.2. Apply an increasing force on the layman or core rod to make the core rod withdraw from the jacket. When moving the mandrel at a speed of 100 mm min, increase the tension force to a maximum of 100 N or until the mandrel can be re-conveyed in the same syringe
e.3. Use the test apparatus (e.).2.2) Apply a slowly increasing pressure of about 100 kpa min to a maximum of 300 kPa on the needle and record whether the piston seal can retract in the syringe jacket.
e.4. Test report.
At least the following information is given in the trial report:
a) The model and nominal volume of the syringe [milliliters (ml)].
The maximum force applied.
c) Maximum pressure applied:
Date of the trial. 