Manufacturers of thermal conduction oil furnaces, hot blast furnaces, polymer denitrification equipment
With decades of experience in the chemical industry, Changqian Environmental Protection seeks development by physical industry, takes low-carbon economy and turns waste into treasure as the concept, fundamentally solves the problem of high energy consumption and secondary pollution, and makes ultra-low emission scientific and technological and systematic. It is a boiler that uses biomass energy as fuel and is called a biomass boiler, which is divided into biomass steam boiler and biomass.
Mass hot water boiler, biomass hot blast stove, biomass heat conduction oil furnace, vertical biomass boiler, horizontal biomass boiler, etc. In a simple sense, a biomass boiler has the function of an ordinary boiler, but in fact, it is a boiler that uses biomass energy as fuel to work. See the industrial analysis of biomass fuels for biomass gasification of biomass gasification is.
The combustible part of the biomass fuel is converted into combustible gas (mainly hydrogen) under high temperature conditions, using oxygen or oxygenated substances in the air as a gasifier. Biomass boilers are a kind of boiler (carbon monoxide and methane) thermochemical reactions. After the biomass is heated, a large number of volatile substances can be precipitated at a relatively low temperature.
Manufacturers of thermal conduction oil furnaces, hot blast furnaces, polymer denitrification equipment
Go out. For the industrial analysis of several common biomass fuels, see the necessity of using ultra-low emission technology for biomass boiler exhaust gas in biaopg21. Policy: The air emission standards for biomass boilers strictly implement the "Boiler Air Pollutant Emission Standards" formulated by the environmental protection department. The current emission standards for biomass boilers in China are shown in Table 2. And creatures.
Although the quality boiler is less polluting than the coal boiler, it also produces particulate dust, sulfur dioxide (SO), nitrogen oxides (NOx) during its combustion.
The polymer denitrification process (PNCR denitrification process) is the use of computational fluid dynamics (CFD) and chemical kinetic models (CCM) for engineering design, which is about to improve the virtual reality design technology of the predecessors with the size, fuel type and characteristics of the specific combustion unit, the calciner load range, the combustion mode, the furnace excess air, the initial or.
The baseline NOx concentration, furnace flue gas temperature distribution, furnace flue gas velocity distribution, etc. were combined for engineering design. Manufacturers of thermal conduction oil furnaces, hot blast furnaces, polymer denitrification equipment