The pairing methods of Edifier Bluetooth earphones are: using the pairing button, using the NFC function, and using the charging case.
Method 1: Use the pairing button.
This is the most common pairing method and is suitable for most Edifier Bluetooth headset models, such as Edifier Lollipods, Edifier TWS1, Edifier W800BT, etc. The specific steps are as follows:
1.Make sure that your device (phone, computer, etc.) has Bluetooth enabled and is turned on.
2.Turn on the power of the Edifier Bluetooth earphones, press and hold the multi-function button until you hear a prompt tone such as "pairing" or "ready", and the indicator will flash red and white to indicate entering pairing mode.
3.Search for available Bluetooth devices on your device, turn on your device's Bluetooth function and tap "Scan Device" or similar option in the settings interface to search.
4.Select the Edifier Bluetooth headset in the searched list to pair it. The name of the headset is usually "edifier" plus the model number, such as "edifier lollipods l" and "edifier lollipods r".
5.If needed, enter the pairing code or confirm the pairing request when prompted on your device. In general, the pairing code is "0000" or "1234".
6.After successful pairing, the indicator light of the earbuds will turn blue or stop flashing, and you will hear a prompt tone such as "connection successful" or "connected". The name and battery level of the headphones are also displayed on the device.
Method 2: Use NFC.
This is a more convenient pairing method, which is suitable for some models of NFC-enabled Edifier Bluetooth headsets, such as Edifier W860NB, Edifier W828NB, etc. The specific steps are as follows:
1.Make sure your device (phone, tablet, etc.) supports NFC and is turned on.
2.Power on the Edifier Bluetooth headset and make sure the headset is on.
3.Place the NFC sensing area of the device close to the NFC logo of the earphone, usually on the case on the left or right side of the earphone.
4.A prompt box will pop up on the device asking if you want to connect to the Edifier Bluetooth headphones. Click "Yes" or "OK" to pair.
5.After successful pairing, the earbuds will emit a prompt tone such as "Connected Successfully" or "Connected". The name and battery level of the headphones are also displayed on the device.
Method 3: Use the charging case.
This is a special pairing method that only works with Edifier's true wireless Bluetooth headphones, such as Edifier TWS200, Edifier TWS5, Edifier TWS6, etc. The specific steps are as follows:
1.Make sure that your device (phone, computer, etc.) has Bluetooth enabled and is turned on.
2.Put the Edifier True Wireless Bluetooth Earbuds into the charging case, close the lid of the case, and then open the lid again, the earbuds will automatically enter pairing mode, and the indicator light will flash white.
3.Search for available Bluetooth devices on your device, turn on your device's Bluetooth function and tap "Scan Device" or similar option in the settings interface to search.
4.Select Edifier True Wireless Bluetooth Earbuds in the searched list for pairing. The name of the headset is usually "EDIFIER" plus the model number, such as "EDIFIER TWS200".
5.If needed, enter the pairing code or confirm the pairing request when prompted on your device. In general, the pairing code is "0000" or "1234".
6.After successful pairing, the indicator light of the earbuds will turn blue or stop flashing, and you will hear a prompt tone such as "connection successful" or "connected". The name and battery level of the headphones are also displayed on the device.
The above are the three ways to pair Edifier Bluetooth headsets, and you can choose the appropriate method according to your headset model and device type.