Applicable places:
It is suitable for mobile lighting in chemical, steel, electric power, railway, coal, metallurgy, mining, port, railway tunnel, bridge and culvert and other industries.
Features::
The light source adopts LED light source, which has high light efficiency and a light source life of up to 100,000 hours. Pulse dimming technology is adopted, and the strong light working light can be selected arbitrarily;
This lamp adopts a light-touch cycle switch, and the lamp presses the switch once in the closed state to start the strong light; Press twice, convert to low light; Press three times to strobe and a fourth to turn off the light.
The reflector adopts high-tech surface treatment technology, with high reflective efficiency and an irradiation distance of more than 1000 meters;
Digital power display function, using real-time detection, to detect once per second, so as to show the battery capacity;
A variety of charging methods, mains, hand-cranked power generation; When charging by hand and charger, the lamp has a power display, which reminds that charging is being charged in the form of digital flashing, and displays the current power level;
It has the function of emergency power supply, and can charge small electrical appliances such as mobile phones, digital cameras, and ** at any time through the equipped electric energy output adapter;
It has a super magnetic adsorption function, which is convenient for customers to use and improve the quality of work;
High-energy memory-free battery, large capacity, pollution-free, low self-discharge rate;
It is controlled by intelligent chips, and the output circuit is equipped with intelligent reverse polarity protection to ensure lighting quality;
It can be carried by hand, shoulder, etc., with beautiful appearance, small size and light weight.
Technical Parameters:
Technical parameters: rated voltage: DC111v
Rated capacity: 22ah
Rated power: 3x3w
The average service life of the light source (LED) is 100,000h
Continuous discharge time: 8h (strong light), 16h (working light), strobe 16h
Charging time: 7h
Battery life 1000 (cycles).
Dimensions: 215 88 142mm
Weight: 086kg
Enclosure rating IP65
How to use:
Press the first switch to start the bright light; Press a second time to convert to low light; The third press will strobe and the fourth will turn off the light. is on.
Toggle the head to adjust the beam angle in a range of 120° to meet your lighting needs.
Place the lamp on the platform, hold down the handle of the lamp with one hand, and dial the crank of the handcrank motor with the other hand, rotate the crank at a constant speed clockwise, realize the hand-crank charging is electric.
Through the output socket on the side of the lamp, the mobile phone battery can be charged by using the universal charging dock configured with the lamp or the USB power cable provided with the mobile phone. When the lamp is lit at any gear, connect the universal charging dock or the USB power cord that the mobile phone is equipped with, and the charging dock or mobile phone enters the charging state, and if the lamp is turned off at this time, the charging dock or the mobile phone is still in the charging state; When the lamp is off, first connect the USB power cable provided with the universal charging dock or mobile phone, and then light the lamp, when the charging dock or mobile phone enters the charging state, the lamp can be turned off at this time, but the charging dock or mobile phone is still in the charging state.
When charging with an external power supply, connect the charger plug with the charging port on the side of the lamp reliably, the indicator light shows red to indicate that it is charging, and when it is fully charged, the indicator turns green.
Simple troubleshooting:
Lamps are not lit or not bright enough
Cause: Low battery.
Solution A: Check whether the charger is normal (plug the charger into the power supply and do not connect the load, the indicator light is green to indicate normal), then charge the lamp, and charge the battery for 4-5 hours.
Solution B: Charge the lamp by hand-cranked electricity.
Notes:
This product is only suitable for non-explosion-proof fields, do not press the switch with a hard object.
When charging by hand, rotate the crank at a constant speed, and the speed should be controlled within 100r min, and do not rotate at high speed. After charging, the crank of the hand-cranked generator should be returned to its position in time.
When carrying or transporting, the switch should be avoided from being touched by foreign objects, so as to prevent the switch from being mismoved during transportation and turn on the light.
In places with high ambient temperature or continuous discharge, the surface of the lamp head has a slight temperature rise, which is a normal phenomenon.
Non-professionals are not allowed to disassemble the lamps at will.
Frequently inspect and ensure that the structural parts are tightly bonded to enhance waterproof, dustproof and impact resistance.
Do not disassemble the structural parts of the lamp at will, especially the sealed structural parts.
Operating ambient temperature range: 20 40 .
After use in corrosive environments or seawater, the surface should be wiped to keep the surface of the shell and transparent parts clean to ensure good light transmission.
If the product has not been used for more than three months, battery maintenance is required: the battery is discharged first and then fully charged in the order of charging and discharging.
Warning:
1. The lamps are charged and discharged every three months, otherwise the lamps will be permanently damaged!
2. When the lamp is turned on, the lamp cannot be used normally, please contact our after-sales service personnel in time. If the user opens or uses it without permission, causing permanent damage to the lamp or causing a safety accident, our company will not be liable!
Quality Assurance. This product is strictly in accordance with ISO9001:2000 international quality management system standards for quality control, to ensure that the product quality is higher than the national standard, fully meet the design requirements, the product is guaranteed for 3 years, the light source is guaranteed for one year, within 3 years from the date of purchase, the company is responsible for free maintenance of any failure under the normal use of the product.