Through the exchange with many netizens in the past few days, many friends asked about the topic of what effect the embedded plate can achieve.
Slab support embedded slab is a kind of concrete slab pre-fixed in the foundation, which is used to support the columns, walls and other structures of buildings or bridges. It can have the following effects:
1. Increase the bearing capacity: The plate bearing embedded plate can improve the bearing capacity of the building or bridge by expanding the supporting area. It can evenly distribute gravity and load into the foundation, avoiding damage to the foundation due to great stress.
2.Reduced settlement: Due to the uniform distribution of embedded slabs, it can slow down the settlement rate of buildings or bridges and maintain the stability and stability of the structure. This is especially important in the presence of unstable soils or uneven foundations.
3.Reduce structural deformation: Plate bearing embedded plates can limit the deformation of the structure and reduce the deformation caused by temperature, humidity, soil settlement and other factors. This is especially important for buildings that need to maintain the geometry and relative position of the structure, such as high-rise buildings, long-span bridges, etc.
The laying of the plate bearing embedded plate needs to be carried out according to the following steps:
1. Foundation preparation: First of all, it is necessary to clean and level the foundation surface, and ensure that the strength and flatness of the foundation meet the design requirements.
2.Install the embedded plate: drill holes in the foundation and install the embedded plate to ensure a firm connection between the plate and the foundation. The arrangement of the embedded slabs should meet the requirements of the structural design, usually evenly distributed or according to the load distribution of the building or bridge.
3.Reinforcement of the embedded plate: After the installation of the embedded plate is completed, the connection part needs to be strengthened according to the design requirements, such as the use of steel bar connection, reinforcement mortar and other measures to ensure the firm connection between the embedded plate and the building or bridge structure.
The following requirements need to be met when laying the plate bearing embedded plate:
1. Foundation requirements: The foundation should have sufficient bearing capacity and stability to ensure that the embedded plate can be firmly fixed in the foundation. The levelness and flatness of the foundation should meet the design requirements.
2.Embedded board requirements: The embedded board should be made of concrete materials with high strength and good durability to ensure that it can withstand long-term loads and environmental actions. The size and arrangement of the embedded plate should meet the structural design requirements.
3.Reinforcement requirements: The reinforcement measures of the connection parts should meet the design requirements to ensure that the connection between the embedded plate and the building or bridge structure is firm and reliable.
Plate bearing embedded plates can improve the safety and stability of buildings or bridges by increasing the bearing capacity and reducing settlement and structural deformation. The laying process requires foundation preparation, embedded plate installation and reinforcement of embedded plates, and at the same time needs to meet the requirements of foundation and embedded plates.