20 liters 18 liters paint coating filling machine Shanghai Guangzhi automation equipment***
Here are some relevant information about the 20 liter and 18 liter paint coating filling machines:
Shanghai Guangzhi Automation Equipment***A paint filler is available specifically designed for highly viscous or difficult-to-clean products. This equipment uses the latest European weighing technology, can set a variety of packaging specifications, and uses Siemens' programmable microcomputer controller, which can store more than 30 kinds of packaging specification data. In addition, the equipment also has the functions of automatic unwinding speed adjustment and automatic alarm of out-of-tolerance, as well as safety measures equipped with explosion-proof devices. This paint filling machine is suitable for products with viscosity less than 5000cps such as coatings, inks, resins, emulsions, glues, etc.1.
Shanghai Guangzhi Automation Equipment also provides an 18-liter paint coating filling machine, which can be widely used in anti-corrosion coatings, inks, water-soluble interior wall latex paints, water-soluble coatings, adhesives, polyurethane, interior wall latex paints, styrene acrylic emulsions, real stone paints, colorful paints, anti-fouling latex paints, printing and dyeing auxiliaries, biomedicine and other fine chemical industries. The system uses gravimetric filling, which has high metering accuracy and is not affected by the material. The charging valve, which consists of fast and slow filling, can not only improve the filling speed but also improve the filling accuracy. The measurement range is large, and the measurement error is less than 10 gram barrels. The filling head adopts an anti-drip device, and the filled material has no bubbles and has a good effect. Automatic control of material feeding, equipped with pneumatic clamp cover and pneumatic pressure plate device 2.
Another product is:Shanghai Guangzhi Automation Equipment***The 20L, 18L explosion-proof filling machine is supplied, which is suitable for the quantitative filling of paints, paints, and resin fluids. The maximum capacity of this machine is 30kg, the minimum inductance is 10g, the filling error is 10-20g (depending on the filling speed), and the filling speed is 100-150 barrel hours (depending on the feed flow rate). It has an explosion-proof level of Exdiaiibt4, the power supply is AC220 50Hz, and the air source is 04-0.8MPa, the operating temperature is -10 -40. The control mode is 2-speed pneumatic control filling, with pneumatic capping machine. The filling method is bucket type, and the barrel mouth is filled. The size of the weighing platform is 400 400 mm, and the temporary storage table is 400 1000 mm. The structure is made of SUS304 stainless steel, and the tip pipe is SUS304 stainless steel and PTFE (optional 316L). The material interface is DN40 quick-assembly pagoda joint, and the flange joint is optional. The air source interface is 8mm air pipe access 3.
The above information is for reference only, and the specific equipment to buy needs to be considered according to your actual needs and budget. It is recommended that you contact these companies directly for more detailed information and **.