Nowadays, many families have broken bridge aluminum windows, which have good performance, durability, flexible and convenient opening, but sometimes there will be problems when the doors and windows are not closed tightly, and the window sash needs to be adjusted. What is the adjustment method of broken bridge aluminum window sashWhat should I pay attention to in the installation of broken bridge aluminum doors and windows? Let's take these questions and take a look at the relevant content!
What is the adjustment method of broken bridge aluminum window sash
First of all, open its sash, we can see that there are two small holes in the sash; Secondly, use an Allen wrench to rotate it in the opposite direction, if the window is still a little loose, you need to rotate it again until the window is firm and tight, and then you can release the handle.
What should I pay attention to in the installation of broken bridge aluminum doors and windows?
1. Before installation, the size of each hole needs to be checked to ensure that each hole is horizontal and vertical, so as to facilitate the later line and installation.
2. When installing, it should be taken into account the factors of force and plastic deformation, and the distance between the fixed points should not be greater than 500mm, and the distance angle of the fixed points from the frame should not be greater than 150mm. Generally speaking, the connection points cannot be arranged outside the rung or vertical frame, and the thickness of the connecting pieces must be greater than 15mm, and at the same time do a good job of relevant anti-corrosion treatment.
3. When connecting the fixed points, you need to drill a 35mm holes, and at the same time need to be fixed with 4mm self-tapping screws, and each side should not be less than three.
4. When putting the window frame into the hole, the window frame needs to be temporarily fixed.
5. When installing the window sash, the track groove on the window frame should be fixed, and then the window sash should be installed into the window frame, and the position and distance between the sash and the frame should be adjusted gradually, and then they should be fixed with a hinge joint. After installation, it is necessary to double-check whether the doors and windows can be opened freely.
6. When installing the glass, the glass should be placed flat and installed firmly, and no loosening should occur.
The above introduction to the adjustment method of broken bridge aluminum window sash is here, I hope to give you some reference