In industrial production, as an efficient and continuous drying equipment, the installation, commissioning and daily operation of the belt dryer need to follow certain steps and specifications. These operating procedures are described in detail below to ensure proper operation and optimal drying results.
First of all, regarding the installation of the belt dryer, due to its long volume, special attention needs to be paid to maintaining the balance of the equipment during loading and transportation to prevent distortion and deformation. During installation, if the equipment does not need to be fixed with anchor bolts, then a single piece of equipment can be placed directly on the flat ground, and when multiple pieces of equipment are connected in series, it is necessary to ensure that the center of the chain of the latter and the previous one is in the same straight line, so as to ensure that the material can smoothly pass through the mesh belt to form a straight line series production line.
When running and operating the belt dryer, it is first necessary to check whether the wiring of each electrical equipment is firm and ensure that the electrical control part is reliably grounded. Then the power-on test is carried out to check whether each motor is working properly. When running at no load and full load, it is necessary to observe whether the transmission chain is free of stuckness.
For the running speed of the mesh belt, it can be adjusted without stopping through the speed adjustment button on the electric cabinet to adapt to different drying needs. For the adjustment of the drying temperature, the air supply can be adjusted by the inlet shut-off valve that enters the heater of each unit. At the same time, it can be adjusted by referring to the readings displayed by the temperature sensor installed on each unit and the thermometer on the electric control box. Finally, the hot air temperature of each unit can be measured and monitored by a thermometer on the electric control box.
By following these installation, commissioning and operating procedures, you can ensure the efficient operation of the belt dryer and thus achieve the best drying results. In practice, it is also necessary to adjust accordingly according to the specific material characteristics and process requirements to obtain the best drying results.