The hydraulic power pack is a powerful and versatile tool that can be connected to a variety of tools and equipment. The overall structure of the hydraulic power pack is relatively compact, and it can even be placed directly in the trunk.
The hydraulic power pack uses a Honda engine, which can be gasoline or diesel, depending on the actual situation.
Next, I will share with you two common problems about hydraulic power packs: substandard flow and overheating, which are actually some minor problems, which may be tricky for novices, and they are very simple to solve.
During the use of hydraulic power packs, some potential problems and challenges may quietly emerge. Here, we will focus on two common problems: overheating of the power pack and substandard flow rates.
First of all, let's talk about the high temperature heating problem of the hydraulic power pack. This problem can stem from three main factors. One is that the system may be overloaded, exceeding the capacity of the hydraulic power pack, manifesting as an abnormally high pressure or excessive rotational speed. The second is the quality of the hydraulic oil, if the cleanliness of the hydraulic oil is not up to standard, it may lead to serious internal wear, reduced volumetric efficiency, and even leakage. Third, the oil outlet pipe is too thin and the oil flow rate is too high, which may cause temperature anomalies. Second, we analyze the problem of substandard traffic. This problem is usually caused by four reasons: first, the cleanliness of the oil inlet filter element is insufficient, which affects the oil absorption efficiency; Second, the installation position of the pump is too high, which may affect the oil absorption; Third, the suction pipe of the gear pump is too thin, which affects the oil absorption; Fourth, the oil suction port joint leaks, resulting in insufficient oil absorption.
It is worth noting that during the operation of the hydraulic system, the temperature of the hydraulic oil will rise to a certain extent. As the oil temperature increases, its viscosity may decrease. In order to ensure the stable operation of the hydraulic power pack, we must control the oil temperature below 60. In addition, when selecting hydraulic fluids, we should give preference to those that can maintain stable performance at different temperatures.