- Polyaluminium chloride (PAC) is a commonly used water treatment agent to purify and treat water sources to remove impurities such as suspended solids, particulate matter, and organic matter.
PAC is a colorless or pale yellow powder that is soluble in water. Its main component is a polymeric aluminum salt, which contains aluminum ions and chloride ions.
PAC has high flocculation performance and oxidation, and can effectively adsorb colloids and particulate matter in the water treatment process, promote the precipitation of suspended solids and solid-liquid separation.
Please read and follow the Safety Data Sheet carefully before using the PAC.
When treating water sources, ensure that operators wear appropriate personal protective equipment such as gloves, goggles, and protective clothing.
It is strictly forbidden to mix with other chemicals to avoid harmful gases or side reactions.
Try to operate in a well-ventilated area to avoid inhaling dust or gases.
PAC should be stored in a dry, cool, airtight container, away from ignition and oxidants.
During transportation, care should be taken to prevent the packaging from being damaged or spilled.
In the event of spillage or spillage during the use of the PAC, please take the following measures promptly:
Do not touch it directly with your hands, and immediately rinse the ** part that has been splashed thoroughly with water.
If dust or gas is inhaled, move to a place with fresh air immediately and keep resting.
In case of eye contact, rinse immediately with plenty of water for at least 15 minutes and seek medical help.
When PAC treats water sources, it generates a certain amount of sewage and waste. In the process of treatment, relevant laws and guidelines on environmental protection should be complied with to ensure the reasonable treatment of sewage and the safe disposal of waste.
PAC is widely used in water treatment, sewage treatment, textile industry, paper industry and other fields. For each specific application area, there are corresponding usage methods and precautions, please refer to the relevant technical guides and operating manuals.
Polyaluminum chloride is a commonly used water treatment agent with high flocculation performance and oxidation. When using the PAC, operators should wear appropriate personal protective equipment and follow the guidance in the Safety Data Sheets. During storage and transportation, care needs to be taken to prevent packaging breakage and spillage. Emergency measures include rinsing your eyes** quickly, as well as moving to a place of fresh air to rest. When treating sewage and waste, relevant environmental regulations and guidelines should be observed. Each specific application area has specific usage methods and precautions, please refer to the relevant technical guides and operating manuals.