Features of insulated aluminum coils.
1.Aluminum coils are lighter in weight. Accounting for ** per square meter, steel and aluminum are almost equal.
2.Aluminum coil is easy to process and form, and the construction is convenient and fast, which will reduce the labor intensity of the construction personnel.
3.The aluminum coil is beautiful, and the aluminum skin is used for thermal insulation decoration, which has a good bright visual effect and is bright and magnificent after the pipeline is wrapped!
4.Aluminum coil has a long service life, because aluminum has corrosion resistance, under normal circumstances, it will not corrode in about 15 years if used properly.
5.The utilization value of aluminum coil is high, and the iron sheet will corrode and rot after a few years, and there is almost no utilization value, but the value of the furnace after aluminum coil is higher. At least about 80% can be utilized.
6.Aluminum coils are widely used in oil refineries, power plants, chemical plants, etc., pipeline outsourcing insulation projects!
Aluminum sheet commonly used in pipeline insulation engineering, common specifications of pipeline insulation aluminum sheet gauge commonly used in tank pipeline insulation: 03mm*1000mm*c、0.35mm*1000mm*c、0.4mm*1000mm*c、0.45mm*1000mm*c、0.5mm*1000mm*c、0.6mm*1000mm*c、0.7mm*1000mm*c、0.8mm*1000mm*c、0.9mm*1000mm*c、1.0mm*1000mm*c, etc.
Regarding the pipe insulation project, the aluminum skin of the thickness of the instructions should be used to give you a common examination range:
0.3mm aluminum skin: indoor aluminum skin is simple to wrap for pipe insulation.
0.4mm aluminum skin: indoor aluminum skin is simple to wrap for pipe insulation.
0.5mm aluminum skin: indoor aluminum skin is simple to wrap for pipe insulation.
0.6mm aluminum skin: indoor aluminum skin is simple to wrap for pipe insulation.
0.7mm aluminum skin: good outdoor corrosion resistance is required.
0.8mm aluminum skin: good outdoor corrosion resistance is required.
0.9mm aluminum skin: the use of aluminum skin with extremely high requirements for the thickness of the aluminum skin.
1.0mm aluminum sheet: It will be used if the weight density of the insulation aluminum coil is high.
In the process of pipeline insulation construction, the surface of the aluminum coil will be coated and protected, which is generally covered with blue or colorless PVC protective film, because it is coated with a machine, the surface will be relatively flat and the coverage area is complete.