The accuracy of the cam splitter can be maintained in a constant state of 30 seconds for 5 years, which requires additional conditions to support, one of the support conditions is that there must be cam splitter lubricating oil, due to the life and use of the oil seal, it may lead to oil leakage of the cam splitter, so what should we do with this oil leakage? Let's do it!
The self-rescue steps for oil leakage in the cam splitter are:
1. First find out the specific location of the oil leakage of the cam splitter, usually the input shaft has an oil seal and may leak oil. In addition, when installed vertically, there may be oil leakage at the oil seal of the output shaft.
2. After finding out the specific oil leakage location, we will judge whether there is a problem with the oil seal or a knock on the input and output shaft of the cam splitter.
3. For the case that there is a problem with the oil seal, we tilt the cam splitter to prevent oil leakage at the input and output shaft after the oil seal is removed, and check whether the input and output shaft is damaged.
4. Slowly embed the intact oil seal into the shaft of the cam splitter, and test run for three hours to check whether there is any oil leakage. Cam splitter oil leakage treatment