When children are in kindergarten or elementary school, teachers often assign some handicraft tasks, and parents need help to complete them. Clocks are a very interesting option when it comes to making handmade pieces. Not only can they be used to decorate a room, but they also allow children to learn how to operate mechanical parts and help children learn a little bit about time. Here are the basic steps to make a clock.
1. Prepare materials.
Before you start making, you'll need to prepare the following materials:
A blank clock chassis (can be purchased at craft stores).
Some colored pencils or markers.
A clock digital template (which can be found on the internet or drawn yourself).
Four small beads for the four hands that represent the clock.
A clock movement (can be purchased at craft shops).
Some gadgets such as screwdrivers and pliers.
2. Draw the clock face.
1.Use a colored pencil or marker pen to draw out the position of the 12 numbers on the base of the clock. Make sure the numbers are in the correct position and that each number is at an equal distance from each other.
2.Depending on your preference, different colors or patterns can be used to decorate the clock face. For example, you can add some small flowers or stars between the numbers, or draw a colored line around the edges.
3. Install the pointer.
1.Use a gadget to remove the four small holes in the chassis of the clock, which are used to mount the hands.
2.Place the four beads on each of the four small holes and secure them with a screwdriver. These small beads will represent the four hands of the clock.
3.Write the corresponding number on each pointer. In general, the shortest hand represents the hour, the longest hand represents the minute, and the other two hands represent the second hand and the auxiliary hand of the second hand.
4.Insert the hands into the small holes in the chassis of the clock with pliers, and then adjust their position so that they can correctly indicate the time.
Fourth, install the movement.
1.Use a gadget to remove the old movement from the chassis of the clock. In general, the movement is fastened to the chassis by two screws.
2.Place the new calibers on the chassis and use a screwdriver to secure them. Make sure that the movement is securely installed and does not come loose.
3.Turn the clock chassis over and use pliers to insert the wires of the movement into the corresponding holes in the chassis. These wires will be used to connect the hands to the movement. 4.Adjust the wires of the movement so that they are properly attached to the hands. In general, each pointer needs to be attached to one of the poles of the movement. 5.Finally, use pliers to secure the wires of the movement to the chassis. Make sure the wires don't come loose or move. Sochuang Premium Plan