Manual hydraulic handling forklift is a convenient and flexible cargo handling tool with large load capacity and durability. It is suitable for places such as factories, workshops, warehouses, stations, docks and airports, and especially for places with fire and explosion-proof needs, such as printing workshops, oil depots and chemical warehouses.
Due to the frequent use of manual hydraulic handling forklifts, the load-bearing wheels are seriously worn, but the structure of its accessories is simple, and the method of replacing the wheels is relatively simple and straightforward.
First of all, when choosing manual hydraulic forklift wheels, you need to pay attention to the material of the wheels, there are nylon wheels and polyurethane wheels to choose from. Nylon wheels are suitable for cement floors and are wear-resistant; The polyurethane wheel is suitable for a better site ground, which plays a protective role and does not hurt the ground.
Secondly, the replacement method of the manual hydraulic forklift wheel is as follows: first knock off the open pin with a steel nail, then beat the axle out, remove the wheel in order, and then install the new wheel, and install the pin in the opposite order.
If the wheel is seriously rusted, you need to find a hardness firing pin to punch out the hollow pin of the wheel and the axle, and then knock out the small axle, and replace the wheel and bearing together. For load-bearing wheels that are heavily rusted, they can be worn with a grinder or replaced as a whole. As for the big wheel, you can generally use the circlip pliers to disassemble the circlip, and then use a hammer to knock out the big wheel.