When the floor height of an industrial building exceeds 8 meters, there are different regulations when calculating the floor area ratio. Here are some key messages:
1.According to the notice of the "Control Index of Construction Land for Industrial Projects (Trial)" (Guo Lu Zi Fa No. 2004 No. 232), when the floor height of the building exceeds 8 meters, the floor area of the floor is doubled when calculating the floor area ratio. This means that if an industrial building has a floor height of more than 8 meters, then the floor area of that floor area is calculated as twice as high when calculating the floor area ratio.
2.However, there are also local regulations, such as Suzhou's Technical Regulations on the Planning and Management of Suzhou Industrial Park (2011 Edition) and Su Yuan Gui 2014 No. 30, which have more detailed provisions on the calculation of the floor area ratio of industrial plants. For example, the floor height is greater than 80 meters, not more than 11The part of 0 meters is multiplied by 2 by its horizontal projection area0 factor is included in the floor area ratio; Based on this, the building floor height increases by 30 meters, an increase of 10 coefficient. Specifically:
1.0x: Floor height 80 meters.
2.0x: 80 m Ceiling height 110 meters.
3.0x: 110 m Ceiling height 140 meters.
3.It is important to note that these regulations may vary from region to region, so in practice, the specific calculation method should be determined with reference to local planning and construction regulations.
In practice, it is advisable to consult with the local planning and construction department for the most accurate capacity calculation regulations. At the same time, if you need to calculate a specific floor area ratio, you may need to consider other factors, such as the purpose of the building, the type of structure, etc.