18 liters square engine oil latex paint barrel thinner barrel filling machine Shanghai Guangzhi automation equipment***
Product application: ink, emulsion, adhesive products, quantitative filling of 5-25L large opening packaging barrels.
Basic parameters. Large Capacity: 30kg
Small sensitivity: 001kg
Filling speed: 18L - about 5 barrels min, 5L about 8 barrels min (depending on the feed flow rate).
Control mode: 2-speed control.
Filling method: on the barrel mouth.
Platform size: 400 400mm
Drum material: composite stainless steel.
Line pressure: 02-0.6MPa (related to material properties).
Material interface: DN50 quick-release clamp, interface standard can be provided according to the user.
Air supply connection: 8mm air pipe fitting is provided by the user for quick coupling connection.
Power supply: AC220 50Hz (provided by the user to the side of the machine).
Air supply: 04-0.8MPa (user-supplied to the machine side).
Operating temperature: -10 -50
Foundation conditions: horizontal solid concrete floor, concrete thickness should be greater than 10cm.
Workflow. a. The operator places the empty barrel to the weighing platform, so that the filling nozzle is located directly above the barrel mouth;
b. The operator presses the [start] button;
c. Automatically inspect the weight of the container, automatically remove the tare weight, open the valve and the bottom valve of the mouth for rapid filling, the filling speed becomes smaller when the weight reaches the small material value, and the two valves are fully closed when the weight reaches the target amount minus the advance amount, and the error is detected and displayed;
d. The operator will move the heavy barrel out of the weighing platform and cover the gland. A filling process is completed;
E. Repeat steps A-D for continuous filling.
System Overview. Ink semi-automatic filling machine, using the filling method on the barrel mouth, is suitable for the filling of ink, latex paint, emulsion, adhesive and other non-foaming viscous materials. The uniquely designed filling head device is easy to operate, and the filling is fast; And to ensure the drip of the residual liquid when the perfusion is completed, it is guaranteed to be as much as possible. To operate, the operator simply points the barrel mouth directly under the filling head and presses the [Start] button to automatically tare the empty barrel. Then open the filling head valve, ground double speed filling; At the end of filling, the filling head valve is automatically closed, and the barrel is manually pushed out of the upper cap of the weighing table.