In the CAD drafting process, arrows play a pivotal role. Not only do they represent direction, but they are often used as an important tool for annotation and illustration. Therefore, mastering the skills of CAD drawing arrows is not only necessary, but also essential to improve the efficiency and quality of drawing. So, how do you draw arrows in CAD? Now, let's follow this article and explore several ways to draw arrows in CAD, so that you can be comfortable in your drafting work. CAD tutorials
Step 1:Start Haochen CAD, create a new After opening the drawing file, call the CAD polyline command shortcut key PL, according to the system prompts to specify the starting point of the polyline in the drawing, after specifying the starting point, the command line will prompt as shown in the following figure:
Step 2:At this time, we need to set the line width of the polyline, enter :w according to the prompt, press the enter key to confirm, specify the starting point width and the end width as: 5, and press the enter key to confirm.
Step 3:Specify the next point of the polyline in the drawing according to the prompt; At this time, the previous prompt will be repeated, enter w again, and press the enter key; Specify the starting width as 20 and press Enter. Set the specified endpoint width to 0 and press Enter. Finally, you can specify the next endpoint location of the polyline to complete the CAD arrow.
Step 1:Open the new drawing file in Haochen CAD, and call the CAD leader annotation command shortcut key LE.
Step 2:At the command prompt, specify the first leader point in the sheet, which is the leader point, which is the starting point of the arrow. Specify the next point as well, specify three points and press the enter key to confirm.
Step 3:At the command prompt, specify the text width, enter the first line of the note text, the next line...Press Enter to end the command.
Step 1:Open Haochen CAD mechanical software, and then click [Haochen Machinery] - [Drawing Tools] - [Arrow] in the menu bar.
Step 2:After executing the command, the [Arrow] dialog box will pop up, set the length, width, color and other parameters of the arrow according to the actual needs, specify the endpoint of the arrow in the drawing area, and determine the position of the arrow.
In short, there are many ways to draw arrows in CAD, depending on the design needs. Whichever method you choose, you'll need to make sure that the arrows you draw meet the required specifications and standards to harmonize with other graphic elements.