Technology meets reading
In order to ensure the normal operation of the blown film machine and prolong its service life, regular care and maintenance are essential. The following is a detailed maintenance and repair record of the blown film machine for your reference. 
1. Daily maintenance 1Clean the surface of the device and keep it dry and tidy. 2.Check the fasteners of all parts of the equipment to ensure that there is no loosening. 3.Clean the inside of the equipment regularly, especially the heater and die part, to prevent fouling from affecting the heating effect and product quality. 4.Check the motor and transmission device to ensure that the rotation is flexible and there is no abnormal noise. 5.Check the cooling system to ensure that the cooling water flows smoothly. 2. Regular maintenance 1A comprehensive equipment inspection is carried out every quarter, including electrical system, hydraulic system, pneumatic system, etc., to ensure that each system is working properly. 2.Replace equipment wearing parts, such as heaters, dies, screws, etc., to ensure stable equipment performance. 3.Lubricate the transmission device to ensure the good operation of the transmission components. 4.Inspect the electrical components and replace them in time if damaged. 5.The equipment is tested for dry operation to ensure that there are no abnormal sounds and vibrations. 3. Maintenance record 1Record the specific content, time and person in charge of each maintenance and repair. 2.Record the equipment failure phenomenon, cause analysis and treatment methods. 3.Record the name, quantity, and specifications of the parts to be replaced. 4.Record the test situation and performance test data after maintenance. 5.For major maintenance projects, a detailed maintenance report should be prepared and archived for future reference. Through the strict implementation of the above maintenance and repair records, the failure rate of the film blowing machine can be effectively reduced, and the service life and production efficiency of the equipment can be improved. At the same time, it is also conducive to the standardization and standardization of the maintenance and management of equipment.