Midea's air conditioner shows "dusty" means that the air conditioner's filter has accumulated a lot of dust and needs to be cleaned. If it is not cleaned in time, it will affect the cooling and heating effect of the air conditioner, and even lead to the failure of the air conditioner. So, how to eliminate the "dusty" display of Midea's air conditioner?Below, we'll walk you through the steps.
1.Cut off the power: Before cleaning the air conditioner, always cut off the power to ensure safety.
2.To remove the filter: Open the air conditioner panel and locate the location of the filter. Typically, the filter is located underneath or behind the air conditioner panel. Gently grasp the edge of the strainer with your hand and pull it outward.
3.Wash the filter: Place the filter under the faucet and rinse it with clean water. If there is stubborn dirt on the filter, you can use a neutral detergent to clean it, but be careful not to use a detergent with strong acids and alkalis to avoid damaging the filter.
4.Dry the filter: Dry the cleaned filter in a well-ventilated place, not in the sun, so as not to deform the filter.
5.Install the filter: Reinstall the dried filter into the air conditioner, making sure it is securely installed.
6.Start the air conditioner: After cleaning the filter, restart the air conditioner and observe whether the "Dust Full" display disappears. If the display persists, you can try to clean the filter again or contact the Midea air conditioner after-sales service personnel for repair.
Through the above steps, you can eliminate the "dusty" display of the Midea air conditioner and let the air conditioner resume normal operation. It is recommended to clean the filter regularly, generally once a quarter, which can effectively prevent dust accumulation and improve the service life and effect of the air conditioner.