Caterpillar C18 engine specifications.
The Caterpillar C18 engine is a high-performance, high-efficiency diesel engine used in a wide range of heavy equipment such as excavators, bulldozers and loaders. Here are the detailed parameters of the Carter C18 engine:
1.Displacement: 181 liter.
2.Power: The maximum power is 600 hp (447 kW), depending on fuel and altitude.
3.Torque: Maximum torque is 2050 lb-ft (2784 Newton-m), depending on fuel and altitude.
4.Speed: The maximum speed is 2100 rpm.
5.Fuel Efficiency: At its best, it consumes 19 lbs (0.)86 kg) fuel.
6.Weight: Approx. 2200 lbs (998 kg).
7.Dimensions: length, width and height are 1565×236.2×329.4 mm.
8.Compression ratio: 155:1
9.Turbochargers: Two turbochargers, air-cooled intercooler.
10.Emission standards: Meets U.S. EPA Tier 4 Final and EU Stage IV emission standards.
11.Starting mode: electric start or compressed air start.
12.Lubricant capacity: approx. 15 gallons (57 liters).
13.Cooling system: water-cooled with thermostat and fan.
14.Oil filter change interval: about 300 hours or every 6 months.
15.Maintenance Intervals: It is recommended to change the oil and diesel filters every operating hours, check the fuel filters and coolant every 50 hours of operation, change the fuel filters every 500 hours of operation, and overhaul every 2000 hours of operation.
The above are the main parameters of the Caterpillar C18 engine, for more information, it is recommended to consult the official Caterpillar customer service or consult the relevant technical manual.