The booster ratio of the gas booster pump refers to the ratio of the output pressure of the gas booster pump to its input pressure. This ratio determines the boosting capacity of the gas booster pump, i.e. how many times the outlet pressure can be raised.
The following factors need to be considered when choosing a product with the appropriate boost ratio:
1.Practical application requirements: Determine the required outlet pressure based on actual application requirements. If the outlet pressure requirements are high, a pump with a larger boost ratio is required.
2.Inlet pressure: The lower the inlet pressure, the smaller the boost ratio required. If the inlet pressure is unstable or low, choosing a smaller boost ratio can avoid excessive pressure fluctuations.
Flow requirements: If the flow requirements after high pressure are high, you need to choose a gas booster pump with a larger flow rate. At the same time, factors such as the speed of the gas booster pump and the diameter of the piston should also be considered.
3.Air motor power: A balanced choice needs to be made between the boost ratio of the gas booster pump and the power of the air motor. On the premise of meeting the outlet pressure requirements, try to choose an air motor with less power to reduce energy consumption and cost.
4.Gas type and condition: Different gas types and states also have an impact on the performance of a gas booster pump. For example, for highly compressible gases or moisture gases, it is necessary to select a pump with a large boost ratio.
5.Brand and manufacturer reputation: Choosing a well-known brand and a reputable manufacturer can ensure that the purchased gas booster pump has reliable quality and performance. At the same time, the selection guidance and after-sales service provided by the manufacturer are also factors that need to be considered when choosing.
To sum up, the selection of gas booster pump products with the appropriate boost ratio needs to be comprehensively considered according to actual needs. It is recommended to consult a professional or manufacturer before choosing to ensure that the model is selected correctly and the most suitable use effect is obtained.