CAD Drawing Quickly draw a snowflake pattern you like! Before you know it, it has entered the depths of winter, and at this time, whether it is the big friends or the children, what they are most looking forward to is snowball fights, building snowmen or setting off firecrackers. Today, we will teach you to use Haochen CAD to draw a variety of unique CAD snowflake patterns, so that you can see different snowflakes even if you are in a warm room. Of course, different CAD snowflake patterns also have different rank difficulty, try to see which rank you belong to! #cad#
CAD Snowflake Pattern 1
Open Haochen CAD, use the circle command [c] to draw a circle with a radius of 30, and then use the polygon command [pol] to draw a trilateral with the center point as the center of the circle, the number of sides is 3 and the circle is connected to the circle, and the radius is 30. Then use the rotation command [ro] to execute the selection copy command on the polygon you just drawn, rotate the base point to the center of the circle, rotate the angle to 180°, and finally trim the line segment.
Then use the straight line command [l] to draw a line with a length of 30, and draw a line with angles 30 and length 15 and angle-30 and length 15 at the position where the line is offset upwards by 10 and 20, respectively. And use the copy command to copy the angle 30 straight line upwards to stretch the straight line length. After completion, use the mirror command [mi] to mirror the object on the right side of the line, the vertical line is the mirror line, and finally use the array command [ar] to make a circular array of objects.
CAD Snowflake Pattern 2
Open Haochen CAD, use the polygon command [pol] to draw a hexagon with the center point as the center of the circle, the number of sides is 6 and the circle is indented, and the radius is 30, and then use the straight line command [l] to draw a straight line with a length of 50 at the midpoint of the hexagon edge. After drawing a straight line with an angle of 45 and a length of 25 on the right side of the line, use the array command [ar] to select the path pattern, the vertical line is the pattern path, the pattern item is 5, and the distance between the pattern objects is 10.
After using the Explode command [x] to explode the pattern object, draw a straight line on the pattern object and trim the pattern object along the line. Finally, use the mirror command [mi] to mirror the object on the right side of the line with the vertical line as the mirror line, and use the array command [ar] to make a circular array of objects.
CAD Snowflake Pattern 3
Open Haochen CAD and use the straight line command [L] to draw a straight line with a length of 50. After drawing a line with an angle of 40 and a length of 20 to the right of the midpoint of the line, use the copy command [copy] to copy the lines upwards and draw a 130° line upwards at the right end of the angle line. After trimming along a straight line, use the mirror command [mi] to mirror the vertical line and mirror the object to the right of the line, and use the array command [ar] to make a circular array of objects.
CAD Snowflake Pattern 4
Open Haochen CAD, use the circle command [C] to draw a circle with a radius of 20, use the straight line command [L] to draw a straight line with a length of 30 at the quadrant point of the circle, and draw a straight line with an angle of 30 and a length of 16 on the right side of the midpoint of the line. Draw a line with an angle of 30 and a length of 6 on the right side of the top of the line, and then use the mirror command [mi] to mirror the object on the right side of the line with the vertical line as the mirror line. Then use the circle command [c] to draw a circle with radius 5 above the line, and use the fill command [h] to color the circle. Finally, use the array command [ar] to make a circular array of objects.
CAD Snowflake Pattern 5
After drawing a hexagon with a radius of 5 centered on the center point and 6 sides attached to the circle, using the polygon command [pol], rotate the polygon by 30° using the rotation command [ro]. Draw a 40-length line, use the polygon command [pol] to draw a hexagon with the end of the line as the center of the circle, the number of sides is 6, and the radius is 3, and use the rotation command [ro] to rotate the polygon by 30°, and use the offset command [offset] to offset the polygon outward by a distance of 1. Draw a straight line with an angle of 35 and a length of 5 to the right of the midpoint of the line, and use the Array command to array the line downwards with a distance of 65, the number of items is 5. After trimming the segments, use the mirror command [mi] to mirror the line.
After drawing a straight line with length 47 and angle 60 at the midpoint of the hexagonal edge, use the polygon command [pol] to draw a hexagon with the end of the line as the center of the circle, the number of sides is 6, and the radius is 3, and use the offset command [offset] to offset the polygon outward by a distance of 1 and 2, respectively. After drawing a line with an angle of 35 and a length of 5 to the right of the midpoint of the line, use the Array command to pattern the line downwards with a distance of 7 items and a 5 number of items. After trimming the segments, use the mirror command [mi] to mirror the circle, and then use the fill command [h] to color the circle. Finally, use the array command [ar] to make a circular array of objects.
CAD Snowflake Pattern 6
After drawing a circle with a radius of 5, draw a straight line of length 20 at the quadrant point of the circle. Then draw a line with an angle of 60 and a length of 6 to the right of the midpoint of the line, and draw a circle with a radius of 3 at the midpoint of the line. After coloring the circle using the fill command [h], use the array command [ar] to circle the object.
After drawing a line with an angle of 23 starting from the center of the circle, draw a circle with a radius of 18 in the center of the circle, and use the Line command [l] to connect the line to the intersection of the circle. Then draw a circle with a radius of 2 at the intersection point, and draw a straight line with an angle of 55 and a length of 3 at the intersection of the circle and the straight line. Use the Mirror command [mi] to mirror a line, crop the excess segments, color the circle with the fill command [h], and circle the object with the array command [ar].
What kind of CAD snowflake patterns would you draw?