The so-called second-flow atomization method is a process in which the melt is crushed into fine droplets by generating a high-speed and high-pressure medium through a nozzle, and quickly solidified into a powder under low temperature conditions. The commonly used atomization medium is water or gas, and the corresponding atomization is water atomization and gas atomization. At present, the particle size of the powder produced by this method is about 30 500 m, and its performance is good. The second-stream atomization method has the advantages of low production cost, simple equipment and safe operation.
2. What is the workflow of fluid? ↓↓
Water treatment, air compressor pressurization, water and gas distribution box, atomization terminal
The water source flows into standard system water after water treatment, and is pressurized to 0 by a pump3-0.After 6MPa, it is injected into the pipeline, and the air is pressurized to 0 by the air compressorAfter 8MPa, it is injected into the gas storage tank and pipeline, and then the water and gas distribution box is controlled by the air compressor host to open and break the pipeline, and the water and gas are finally mixed and atomized in the ultrasonic atomization nozzle after the water vapor distribution box is adjusted to the appropriate pressure. List of high-quality authors
How to maintain and maintain two-fluid equipment?
When the equipment is regularly maintained, the power supply must be cut off, and the check can only be carried out after 5-10 minutes after the inverter monitor has no display and the main circuit power indicator is off, so as to avoid the residual voltage of the inverter capacitance and the maintenance personnel. When cleaning the dust of the electrical control box, a low-power fan or vacuum cleaner should be used, and the device should not be disassembled at will, let alone wiped with a wet rag. When measuring the pressure flow rate of electrical parts or fluids, the same measuring tool should be used to make a comparison before and after.