The lack of pressure in the fog cannon machine may be caused by the following reasons:1Water ingress problem: First, check whether the water source** is normal. Ensure that the water supply pressure of the water source is sufficient, and the flow rate of the water source meets the requirements of the fog cannon machine. Also check the inlet pipes and valves to make sure there are no blockages or leaks. If there is a problem with the water inlet pipe, it will cause the fog cannon machine to not be able to absorb water properly.
2.Pump failure: Second, check the pump. The water pump is the core device that generates the working pressure of the fog cannon machine. If the water pump fails, such as motor damage, seal wear and impeller blockage, etc., it will cause the water pump to not provide enough pressure, which will affect the work of the fog cannon machine. The condition of the pump needs to be carefully checked and repaired or replaced in a timely manner.
3.Nozzle Issues: Again, check the nozzles. The nozzle is a key component that atomizes high-pressure water into tiny water droplets. If the nozzle is clogged or damaged, the water flow will be reduced or it will not be sprayed properly. The nozzle needs to be cleaned to ensure smooth jetting.
4.Control system failure: Secondly, check the hydraulic or electrical control system. If the control system fails, it may lead to improper control of the water pump or nozzle, which can affect the working pressure of the fog cannon machine. It is necessary to carefully inspect the connection lines, sensors and other components of the control system to ensure that they are working properly.
5.Water Leakage Problem: Finally, check the tightness of the fog cannon machine. If there is a water leak in the fog cannon machine, it will cause the pressure to drop. Connections, valves, and seals need to be carefully inspected to ensure they are all tightly sealed.
In actual operation, if you encounter the problem that the fog cannon machine has no pressure, you should first eliminate the above problems, and check and repair them step by step. If the problem is more complicated, it is recommended to contact a professional for repair and treatment. At the same time, regular maintenance of the equipment and strengthening the management and monitoring of the equipment can effectively prevent the pressure problem of the fog cannon machine.