Regarding the introduction of ground grouting reinforcement construction technology, this topic has been mentioned again recently, taking this opportunity, the following is a related article introduction for your reference.
Grouting reinforcement is a common method of structural reinforcement in civil engineering, which is suitable for all kinds of land and buildings. Ground grouting reinforcement construction technology refers to the process of reinforcing land or buildings by injecting grout materials.
Let's introduce the concept of ground grouting reinforcement. Ground grouting reinforcement is to increase the stability and bearing capacity of the land or building by injecting grout materials to fill the voids in the land or building. The grouting material can be a slurry of cement slurry, polymer slurry or other special additives.
Before proceeding with the ground grouting reinforcement construction, a preliminary survey is required. The purpose of the preliminary survey is to understand the geology of the land or building, the strength of the condition and the parts that need to be reinforced. According to the preliminary survey results, the scheme and construction parameters of grouting reinforcement can be determined, such as grouting depth, grouting hole spacing, grouting materials, etc.
Then, the construction process of ground grouting reinforcement is introduced. Preparation for drilling or digging a pit is required. The location and number of boreholes or pits are determined based on the results of the preliminary investigation. Then, adjust the grouting equipment to the appropriate parameters and start the grouting construction. Grouting construction can be divided into two ways: single-hole grouting and multi-hole grouting. In the grouting process, it is necessary to control the grouting pressure, grouting speed and grouting amount to ensure the grouting effect. After the grouting material is injected into the land or building, it needs to wait for a certain time to solidify and solidify to increase the stability and bearing capacity of the land or building.
The ground grouting reinforcement construction process is a reinforcement method that fills the voids of the land or building by injecting grout materials to increase its stability and bearing capacity. This process requires preliminary investigation, determination of the grouting scheme and construction parameters, and preparation for drilling or digging pits. In the grouting construction, it is necessary to control the grouting pressure, grouting speed and grouting amount to ensure the grouting effect. It is necessary to wait for the grouting material to solidify and solidify to increase the stability and bearing capacity of the land or building.