Optical pipe radiator is a kind of high-efficiency and energy-saving heat dissipation equipment, which is named because it uses optical pipe as a heat transfer element. Optical pipe radiators have the advantages of simple structure, high heat transfer efficiency, easy installation and long life, and are widely used in various industrial and civil buildings. 
1. Preparation before installation.
Determine the model and specification of the radiator, and check whether the quantity, size and model of the radiator meet the design requirements.
Check the appearance of the radiator to ensure that there is no damage, no deformation, no rust, etc.
Check whether the accessories of the radiator are complete, including connecting pipes, brackets, fixings, etc.
Determine the installation location, select the appropriate installation location according to the design requirements and the actual situation of the site, and mark it.
Second, the installation steps.
After the preparation work before installation is completed, the installation position of the radiator is determined according to the design drawings and the actual situation on the site, and the position of the fixed point is marked on the ground.
Depending on the marked position, install the fixing bracket. The installation of the fixing bracket should be flat and firm to ensure that the radiator can be stably installed on the bracket.
Place the radiator on the bracket and use the connecting pipe to connect the radiator to the heating system. The connecting pipe should be of appropriate diameter to ensure that the flow rate and pressure meet the design requirements. At the same time, attention should be paid to the tightness of the connecting pipe to prevent water leakage.
Check the inlet and outlet directions of the radiator to ensure that the inlet and outlet directions are consistent with the design drawings. If the direction of the import and export is wrong, it should be adjusted in time.
After the installation is completed, the system should be debugged to check whether the radiator is running normally, whether there are water leakage, no heat and other problems. If there is a problem, it should be dealt with in a timely manner.
3. Precautions.
Before installation, the model, specification, quantity and other parameters of the radiator should be carefully checked to ensure that the design requirements are met.
The principle of column first and then beam should be followed during installation to ensure that the column is vertical and the beam is straight. At the same time, a level should be used to check the levelness of the column and beam to ensure that the installation is smooth.
When installing, the spacing should be adjusted according to the actual situation to ensure that the radiator is kept at a certain distance from the wall and the ground to facilitate maintenance and cleaning. At the same time, care should be taken to maintain the distance between the radiator and the pipe to prevent mutual influence.
After the installation is completed, the system should be debugged to check whether the radiator is operating normally. If there is any problem, it should be dealt with in time so as not to affect the use effect and life.
In the process of use, the operation status of the radiator should be checked regularly, and the problems such as water leakage and blockage should be dealt with in time to ensure the normal operation and use effect of the radiator. At the same time, attention should be paid to prevent external forces from hitting and scratching the surface of the radiator, so as not to affect the appearance and use effect.
The radiator should be cleaned and maintained regularly to keep the surface clean and tidy and prolong its service life. When cleaning, it should be wiped with a soft rag, and it is forbidden to use acidic and alkaline detergents.
The light pipe radiator should be avoided from being wet or soaked in water during use, so as not to affect its heat transfer effect and service life. If it needs to be used in a humid environment, waterproof measures should be taken.
If you need to replace accessories or repair during use, you should choose accessories of the same brand and model to ensure the quality of maintenance and use effect. At the same time, attention should be paid to the maintenance procedures to avoid safety accidents or equipment damage caused by improper operation.
During transportation and storage, it should be avoided to bump and scratch the surface of the radiator, so as not to affect the appearance and use effect. At the same time, care should be taken to prevent the radiator from moisture and rain.
4. In order to ensure the normal operation and long-term use of the optical pipe radiator, the following are some maintenance suggestions for the optical pipe radiator:
1.Ensure good ventilation: Light pipe radiators need enough air flow to dissipate heat. Make sure that the space around the radiator is free of blockages and that a well-ventilated environment is maintained to avoid overheating problems.
2.Avoid excessive pressure: Avoid applying excessive pressure to the radiator to avoid damaging its structure or vent holes. Try to avoid impacts or external pressure on the radiator.
3.Regular maintenance: If there is a problem, such as fan noise, clogged exhaust holes, or other conditions that degrade thermal performance, carry out maintenance or replace the problematic part in a timely manner.