The universal remote control of Coty air conditioner is a very practical device, which can be paired with multiple brands of air conditioners, so that it is convenient for users to control various functions of air conditioners. The following will introduce in detail the pairing method of the universal remote control of Kedi air conditioner to ensure that users can complete the pairing operation correctly and efficiently.
1. Preparations.
Before you start pairing, here are some things you need to prepare:
Make sure the aircon is powered on and that the aircon is on standby. This is because during the pairing process, the air conditioner is required to respond to the signal of the remote control, and if the air conditioner is not turned on or in a non-standby state, it may not respond normally.
Install the battery of the universal remote control of the Kedi air conditioner and make sure that the battery is sufficient. If the battery is low, it may affect the normal operation of the remote control.
Confirm the make and model of air conditioner you want to pair. Although the universal remote control of Kedi air conditioner can be paired with multiple brands of air conditioners, there may be slight differences in the pairing of different brands and models of air conditioners. Therefore, knowing the brand and model of air conditioner to be paired in advance will help you complete the pairing operation more smoothly.
2. Pairing method.
There are two main ways to pair the universal remote control of Kedi air conditioner: point-to-point setting mode and automatic search mode. The steps for each of these methods are described below.
Point-to-point settings.
The point-to-point setup is a relatively simple pairing method for situations where air conditioners are known**. The specific steps are as follows:
1) Align the infrared port of the universal remote control of the Kedi air conditioner with the receiving window of the air conditioner to ensure that the distance between the two is within 3 meters and there is no obstruction.
2) Press and hold the ** button of the corresponding air conditioner brand on the remote control until the air conditioner makes a "drop" response sound, indicating that the pairing is successful. At this time, you can release the button to complete the pairing operation.
It should be noted that different brands of air conditioners** may be different, so when making point-to-point settings, you need to consult the manual of the universal remote control of Kedi air conditioner or search for the corresponding ** on the Internet.
Automated search methods.
The automatic search method is useful if you don't know the air conditioner** or can't find it**. The specific steps are as follows:
1) Align the infrared port of the universal remote control of the Kedi air conditioner with the receiving window of the air conditioner to ensure that the distance between the two is within 3 meters and there is no obstruction.
2) Press and hold the "Set" button on the remote control, and the remote control will enter the automatic search state after about 6 seconds. At this time, the remote control will automatically search for the air conditioner's **, and when the air conditioner responds (such as flashing lights, making a sound, etc.), immediately release the "Settings" button.
3) When the air conditioner responds again (such as flashing lights again, making a sound, etc.), immediately press and hold the "Set" button until the air conditioner responds again, indicating that the pairing is successful. At this time, you can release the button to complete the pairing operation.
It is important to note that during the automatic search process, the remote control may search for more than one device**. Therefore, after searching for the ** of the air conditioner, you need to press the "Settings" button again to confirm to ensure that the pairing is correct.
3. Precautions for pairing.
When pairing the universal remote control of the Coty air conditioner, you need to pay attention to the following:
The pairing operation should be carried out within 3 meters of the air conditioner to avoid signal interference or weakening that may cause pairing failure.
During the pairing process, it is necessary to keep the remote control and the receiving window of the air conditioner unobstructed to ensure that the signal can be transmitted smoothly.
If a pairing fails, you can try multiple times. Sometimes it may take multiple attempts to pair successfully due to environmental interference or device issues.
After successful pairing, you can test whether the functions of the remote control are normal. If you find that the function is abnormal or you cannot control the air conditioner, you can try to re-pair or check if the remote control and air conditioner are faulty.
In short, the universal remote control of Kedi air conditioner is a very practical device, which can bring users a more convenient and efficient experience by pairing it with a variety of brands of air conditioners. When performing the pairing operation, you need to make preparations, choose the appropriate pairing method, and pay attention to the details and precautions in the pairing process. Only in this way can we ensure the smooth completion of the pairing operation and give full play to the advantages and functions of the universal remote control of Kedi air conditioner.