Catalytic oxidation equipment is a commonly used equipment in the chemical industry, but various failures will inevitably occur during use. This article will introduce you to the troubleshooting and maintenance methods of catalytic oxidation equipment, so that you can quickly solve problems when the equipment occurs, and ensure the normal operation of the production line.
Fault 1: The device cannot be started
On the basis of checking whether the equipment is connected to the power supply, we also need to pay attention to the following points:
1.Check whether the power supply line of the equipment is normal to ensure that the power supply is sufficient;
2.Check whether the switch on the control panel of the device is in working condition;
3.Check that the fuse of the device is not blown and replace it if necessary.
Fault 2: Abnormal noise occurs when the equipment is running
The appearance of abnormal noise usually indicates that there is a problem with the device, and we can eliminate it by the following methods:
1.Check whether the transmission system of the equipment is loose, such as transmission belts, chains, etc.;
2.Check whether the bearings of the equipment are well lubricated, and add lubricating oil or grease in time if necessary;
3.Check the inside of the device for foreign objects and clean the inside of the device if necessary.
Fault 3: The equipment works poorly
Poor working of the device may be due to the following reasons:
1.Check whether the catalyst of the equipment needs to be replaced, if the catalyst has been deactivated, it needs to be replaced in time;
2.Check whether the temperature, pressure and other parameters of the equipment are correct, and operate in time if necessary;
3.Check whether the inlet air flow of the equipment is normal, and repair it in time if there is any leakage.
Fault 4: The equipment fails frequently
Frequent equipment failures can be due to the following reasons:
1.If the equipment overheats due to long-term operation, it is necessary to shut down the machine to cool down and clean the inside of the equipment regularly;
2.The equipment has reached the end of its useful life, and it is necessary to replace key components or update the equipment as a whole.
Through the inspection and elimination of the above methods, I believe you have mastered the troubleshooting and maintenance methods of catalytic oxidation equipment. In actual operation, we also need to pay attention to the daily maintenance of the equipment, and regularly inspect and maintain the equipment to ensure the long-term stable operation of the equipment.