Is it okay to take one lamp from one drag to two solar street lights?
As a green, environmentally friendly and energy-saving lighting method, solar street lights are more and more favored by people. One-to-two solar street lights, that is, two solar street lights are installed on one light pole, have a higher cost performance and more beautiful lighting effect. However, in some cases, it may be necessary to remove one of the fixtures. So, can the solar street lamp be removed from the lamp?
First of all, we need to understand the structure and working principle of solar street lights. One-in-two solar street lights usually consist of a light pole, two lamp heads, a set of solar panels, and the corresponding controller, battery, etc. Among them, two lamp heads are mounted on both sides of the light pole, which absorb solar energy through solar panels and convert it into electrical energy and store it in the battery. When night comes, the controller will automatically turn on the street lights for lighting.
So, if we need to remove a lamphead, what impact does it have on the whole system? First of all, from a structural point of view, removing a lamp head will not affect the structure of the entire light pole, because the two light heads are mounted independently on both sides of the light pole. However, functionally, removing a lamphead will reduce the illumination area and brightness of the entire system, as one lamphead cannot cover the illumination range of both heads. In addition, due to the reduction of the area of solar energy absorbed by the solar panel, the power generation of the whole system will also be reduced, which will affect the charging effect of the battery and the lighting time of the street lamp.
Therefore, if you need to remove a lamphead, it is recommended to do the following:
1.Before removing the lamp head, understand the configuration and parameters of the entire solar street light system to ensure that removing a light head will not have an excessive impact on the system.
2.Try to keep the whole system in balance and avoid a situation where one head is on and the other is dark. After removing the lamphead, you can adjust the illumination angle of the other lamphead or increase or decrease the lighting time on the controller according to the actual situation.
3.When installing a new lamp head, it is necessary to pay attention to the fixing method and safety of the lamp head to ensure that it will not fall off or shake. At the same time, it is also necessary to adjust the illumination angle and brightness of the lamp head according to the actual situation to achieve the best lighting effect.
In short, solar street lights can be removed from one lamp head, but you need to pay attention to the relevant effects and operation methods. Before removing the lamp head, it is necessary to understand the configuration and parameters of the whole system, and try to maintain the balance and stability of the whole system. At the same time, it is necessary to pay attention to safety and adjust the relevant parameters to achieve the best lighting effect.