Imported cold work alloy steel Y100C6 is a high-strength, high-hardness alloy steel, which performs well in the cold work process and can withstand extremely high pressure and friction. The high carbon content of this steel makes it hardenable and wear-resistant, so it is often used to make mechanical parts that need to withstand heavy loads and friction. In addition, imported cold work alloy steel Y100C6 also has excellent cutting performance and welding performance, which can meet the requirements of various complex processes.
Carbon tool steel is a type of steel with carbon as the main element, which has high hardness and wear resistance, so it is widely used in the manufacture of various tools and cutting tools. Compared with imported cold work alloy steel Y100C6, carbon tool steel has a lower carbon content, and its hardenability and wear resistance are slightly inferior, but its ** is relatively low, easy to obtain, and also has good cutting performance and welding performance. In some cost-sensitive occasions, carbon tool steel can be used as a substitute for imported cold work alloy steel Y100C6.
In general, imported cold work alloy steel Y100C6 and carbon tool steel are both important steel types, and they have a wide range of applications in different occasions. For mechanical parts that need to bear heavy loads and friction, imported cold work alloy steel Y100C6 is a better choice; And in the case of a certain cost requirement, carbon tool steel may be a more economical choice. In practice, it is necessary to select the right type of steel according to the specific needs and conditions.
Grade: Y100C6 steel for measuring tools and cutting tools
China ISC 9CR2
Other names: T30200
Corresponds to GB T 1299-2014
Tool and mould steels
Categorization of tool steels
Tags: steel for measuring and cutting tools, alloy steel
Description Characteristics and uses: The properties are basically similar to that of CR2 steel, and its toughness is better than that of CR2 steel due to its slightly lower carbon content. It is suitable for manufacturing woodworking tools, cold rolls, cold stamping dies and punches, stamping punching dies, etc.
This standard is applicable to hot rolled, forged, cold-drawn, silver bright bar steel and machined delivery steel of tool and die steel, and its chemical composition is also applicable to ingots, billets and their products
Y100C6 chemical element composition content (%)
Composition C Si Mn P s Cr Ni Cu
The minimum value is 08 - 1.3 -
The maximum value is 095 0.4 0.4 0.03 0.03 1.7 0.25 0.25
Smelting method: electric arc furnace.
Y100C6 mechanical properties
Condition: Heat treatment or state hardness
HBW delivery status: Annealed 179 217
Specimen quenched HRC
Specimen heat treatment system: quenching temperature 820 850 °C, oil cooling
Approximate Comparison Table Alloy tool steel
China, United States, Germany, France, Russia, United Kingdom
gb astm/aisi din en/din w-nr. nf en/nf gost bs en/bs
9cr2 l7 100cr6 1.2067 y100c6 9х bl3
This book is also too good