During this time, I checked my friend's reply and found that many friends shared their experience: how to install and use the anchor bolt armor joint is not very clear, so let's talk about the issues that everyone is more concerned about.
Experience sharing: Introduction to the installation and use of anchor bolt armor joints.
1. The setting method of anchor bolt type armor joint:
a.Identify areas where anchor-bolt joints need to be placed, and perform cleaning and preparation, including removal of dust, dirt, and burrs.
b.Then, the prepared area is drilled with a drilling machine, and the diameter and depth of the hole are determined according to the anchor bolt specifications and specific conditions of use.
c.Once the hole is drilled, use compressed air or a purge tool to remove dust and debris from the hole.
d.Next, insert the anchor bolt into the pre-drilled hole, making sure that the bottom of the anchor is flush with the bottom of the hole, and if needed, use a rubber hammer to gently tap the anchor bolt to make it deeper.
e.Use a torque wrench or other appropriate tool to tighten the anchor bolt to the specifications and requirements provided by the manufacturer.
2.Spacing requirements for anchor bolt armor joints:
a.The spacing of the anchor bolt type armor joint should be determined according to the specific situation, and usually should be determined according to the length and stress requirements of the armor joint.
b.Generally speaking, the spacing of adjacent anchors should not be too large to ensure the stability and uniformity of the armor joint.
c.In addition, the spacing should also consider the convenience of installation and operation, to ensure that each anchor bolt can be easily installed and adjusted.
3.Precautions for the use of anchor bolt armor joints:
a.Before installing the anchor, you should carefully read and follow the installation guide provided by the manufacturer to ensure proper installation and use.
b.The anchor bolt armor joint should be fully tested and tested before use to ensure that its performance meets the requirements.
c.Regularly inspect and maintain anchor bolts to identify and repair possible damage or loosening problems in a timely manner.
d.If there is a problem or abnormal situation in the armor joint, measures should be taken to repair and improve it in time to ensure the stability and reliability of the armor joint.
Through the above introduction, we can clearly understand the installation and use methods and precautions of anchor bolt armor joints, and understand its setting methods and spacing requirements.