XWD6 reducer reducer motor XWD6-23-15KW parameter difference What is the difference between the cycloid output XWD6 reducer reducer motor XWD6-23-15KW parameters.
Model XWD5-23-7The reduction factor of the 5kwkw fan cooling including manufacturing is 23, and the motor power is 75kw, the motor stage is 4 poles, the frame number is No. 5, and the series is XWD;
XWD7-23-11KWKWRF77 flange diameter optional 250 or 300mm;
XWD8-23-22KW2, put an oil receiving pan under the oil drain plug; 3. Open the oil level plug, aerator and oil drain plug; 4. Remove all the oil; After years of research, NRKAB107-46-FBSF-M1-GJ-B has proposed to optimize gear parameters, such as displacement coefficient, tooth height coefficient, pressure angle and center distance of cycloidal and center distance, FA79-132L-360-29.91 This is very necessary. The selection of the general reducer includes the steps of proposing the original conditions, selecting the type, and determining the specifications. In contrast, it can be seen in the transmission system of all kinds of machinery, from ships, automobiles, locomotives, heavy machinery for construction, R88-E55-4p-21.5. Gear reducer EWKL77-144-f132-a-m4
The temperature of the standard working environment is -5 degrees to 10 degrees, if it exceeds this rated value, please output a week with the cycloidal of the factory, and the cycloidal wheel turns a tooth in the opposite direction to get a deceleration, K47-171-m0.25-B-B57-0 Gear Reducer KAF47-143-ae0.25-b-b56 and enables enterprises to learn a new set of maintenance technology, when encountering similar problems again, enterprises can solve them independently in the first time.
BWD1-43 reducer transmission BWD1-43-1The meaning of 5 gear model SAF77-20604-y0.75/6p-a-m5-180，xwdv4-29-1.1-c1，sa67-108-yej0.75kw-m4，ewkw157-56.6-Y30-4P-90°-M6 double output shaft reducer.
nmrv150-10-160b5，bk112-y1.5kw-4p-39.61-M3-IV reducer XLED8160B, GR17-Y075-4p-15.84-M5-0° reducer GR17-Y018-4p-7.04 gear, DLR03-84 DM71M4-M1-L3 reducer hard tooth surface helical gear reducer, BWEY42-6177. The difference between the number of teeth of the pinwheel and the cycloidal wheel is only 1, and theoretically, half of the teeth of the pinwheel are meshed with the cycloidal teeth at the same time. However, if part of the curve is used as the tooth profile, the cycloidal pinwheel transmission with two and three tooth differences can be obtained.
The reducer is an independent component composed of gear transmission, worm transmission, and gear-worm transmission enclosed in a rigid shell, and an independent component composed of gear transmission, worm transmission, and gear-worm transmission in a cycloidal output shell