The safety ladder cage is used for workers to walk in the construction site engineering, especially when going up and down the foundation pit, how to ensure the safety ladder cage installation specifications, ensure the safety of operators, and prevent accidents.
Installation specification requirements for safety ladder cages:
1. The top of the safety ladder cage is strictly forbidden to use wire rope and wire fixation, which is easy to break and cannot support the weight of the ladder cage.
2. It is strictly forbidden to use rusty, seriously damaged safety ladder cage, in the installation, dismantling of the ladder cage must be carried out in sections and sections, the overall lifting is not allowed, the installation is completed to focus on checking the joint parts and structural stability, to meet the requirements before use, dismantling and lifting, signalmen and safety officers must be present to supervise.
3. The installation of the safety ladder cage should be inspected regularly, and the ledger should be registered and established after each inspection, and the responsibility should be assigned to the person, and it is limited to workers walking up and down can not be overcrowded, can not be used to carry materials and heavy tools, and should be hung with the upper limit and warning signs.
The safety ladder cage is one of the indispensable equipment on the construction site, and its safety and stability are directly related to the life safety of construction personnel. Therefore, installation specifications and acceptance criteria are important for the use of safety ladder cages.
The installation specifications and acceptance standards of the safety cage are the key factors to ensure the safety of the cage. In the process of installation and acceptance, it is necessary to operate in strict accordance with relevant standards and specifications to ensure that the performance and quality of the ladder cage meet the requirements and ensure the life safety of the construction personnel.
Acceptance criteria for safety ladder cages:
1. The appearance of the safety ladder cage should be smooth and tidy, without obvious deformation and damage. The appearance of the ladder cage should be inspected during acceptance, and if there are obvious defects, it needs to be repaired or replaced in time.
2. The structure of the safety ladder cage should be stable and able to bear the corresponding load. During acceptance, the structure of the ladder cage should be inspected, including the connection of brackets, ladders and protective fences to ensure that the connection is stable and not loose.
3. Performance test: The safety ladder cage should be tested for performance before use, including load test and operation test. The load-bearing test should test the bearing capacity of the ladder cage to ensure that the ladder cage will not be structurally damaged and deformed during use. The operation test should test the running stability of the ladder cage to ensure that the ladder cage will not run abnormally or stagnate during use.