Before we know which instrument is better, we first need to know what an OPT instrument is and how to carry out a project with an OPT instrument.
1. What is OPT?
OPT (Optimal Pulse Technology), that is, optimized pulsed light technology, with a wavelength between 400-1200nm, perfect pulse technology, is a very important technological innovation in the field of photorejuvenation, because the energy is uniform and stable, the strength is still stable while improving comfort, the parameter adjustment degree is high, the filter is more selective, it is very versatile, and has the advantages of high safety, more effective and controllable.
2. What are the best problems that OPT beauty technology can handle? The result?
A: The application range of OPT in skin care is very wide, covering almost all the previous beauty ranges of light, including: wrinkle removal, skin rejuvenation, hair removal, enlarged pores, roughness, sun spots, age spots, freckles, etc. At the same time, it also has a very good effect on telangiectasia. In addition, OPT skin rejuvenation is more effective than traditional photorejuvenation for sagging, especially on the neck.
3. How does OPT Beauty perform beauty?
A: Before OPT, you will usually need to apply a layer of cold gel to the area to be treated, and you will be asked to wear protective goggles or cover your eyes properly to protect your eyes from strong light. For beauty and skin care, gently place the light guide lens of the head of the OPT skin rejuvenation device on the ** to be beautified, and start to release pulsed light. The whole beauty process is relatively relaxed, each skincare session takes about 30 minutes, and in order to achieve the desired results, it usually takes 3 to 5 times.
4. Is OPT Beauty safe? Will it damage**?
A: OPT cosmetic technique is a non-ablative physical**, he provides a non-interventional method to adapt to different **states, so it is safe and effective without any damage to ** and ***
5. Will OPT skin rejuvenation be **?
Answer: OPT skin rejuvenation does not exist, because it mainly adjusts the skin to a healthy state, but it cannot prevent the normal aging of the structure, so after skin care, daily maintenance is still needed to delay aging.
6. What kind of expected results can be obtained from OPT skin rejuvenation?
A: Each skincare session can gradually reduce and improve the pigmentation and problems on the skin. At the end of the beauty treatment, the skin texture will be relatively improved, so that the skin will return to a healthy and plump state.
7. How often should I do OPT skin rejuvenation? Need special care?
Answer: According to the individual's ** situation, it is generally once every 3-4 weeks, and a course of treatment is 3-5 times. No special care is required after OPT, just pay attention to sun protection and hydration.
The biggest feature of OPT is that it can penetrate into the subcutaneous smoothly, and does not hurt, according to your different types, different skin lesion characteristics and different nature of the disease, choose different wavelengths of light sources, on the one hand, it can eliminate pigment spots and fine dilated blood capillaries in the epidermis, on the other hand, it can penetrate deep into the dermal collagen, stimulate collagen proliferation, inhibit the secretion of sebaceous glands (oil glands), increase elasticity, delicate, eliminate fine wrinkles, etc., so the efficacy is greatly enhanced. This is something that photorejuvenation could not achieve in the past, so it is called a beauty method that truly serves the rejuvenation project.
8. How to judge the quality of OPT instruments.
The first step is to look at the system: turn on the machine to see if the operation interface has the following protection measures: pre-ignition prompt, water flow prompt, water temperature prompt, refrigeration control.
The second step is to look at the machine hardware: the manufacturer is required to disassemble the machine to see the internal structure, look at the layout, wiring, water tank, water pump, and heat dissipation method.
The third step is high-intensity testing: set a set of reasonable parameters, such as pulse duration refers to 5ms; The number of pulses is selected as 3, the energy setting level is above 20 (depending on the machine), the frequency is selected to be at least 5Hz, and the light is continuously emitted according to the light button after the point is pre-ignited, until the temperature prompt or other faults occur, if there is no problem with continuous high-load work, it proves that the heat dissipation of the machine is very good.
Looking at the machine from the above aspects, you can basically see a lot of things. No matter how professional the test is, it is the equipment test. For example, manufacturers are required to test the energy on the spot (to evaluate the output performance of the machine from the energy) and test the current pulse width waveform (to see the performance of the power supply from the waveform).