The multifunctional coupling tank realizes the efficient regulation of water in the heating system mainly through the following ways:
1.Pressure Equalization: Through the built-in balancing device and piping design, the pressure of the heating system is effectively balanced, ensuring that each device can get the right water pressure to increase the water temperature.
2.Flow regulation: By adjusting the speed of the pump or the circulation generated by the shaft, the flow rate of each equipment is regulated, so as to prevent the system from being too large or too small, and to avoid the failure of the equipment due to overheating or overcooling.
3.Temperature control: By controlling the speed of the pump or the internal temperature sensor, the heating temperature of each equipment can be accurately controlled to meet the needs of users.
4.Energy storage and voltage stabilization: During low-load operation, hot water enters the coupling tank, and the internal pressure of the coupling tank increases; During high-load operation, hot water flows out of the coupling tank and the pressure inside the coupling tank drops. This keeps the pressure of the heating system stable and ensures that the heating needs of the individual rooms are met.
5.** Use of waste heat: A certain temperature difference will occur during the process of hot and cold water entering the coupling tank, so that the heat is absorbed and stored in the coupling tank, thereby reducing heating energy consumption.
In these ways, the multifunctional coupling tank realizes the efficient regulation of water in the heating system, and improves the operating efficiency and energy saving effect of the system.