Zhongshan color steel roller shutter maintenance: master the skills and easily deal with the failure.
1. What is a color steel roller shutter?
Color steel roller shutter is a common building facility, usually used in commercial places or areas that need protection. It has the characteristics of beauty, durability, easy installation and maintenance, and is widely used in shopping malls, supermarkets, factories, offices and other places.
Second, the importance of color steel roller shutter maintenance.
In daily use, it is inevitable that there will be various faults in the color steel roller shutter, such as door deformation, unsmooth switching, and pulley wear. The occurrence of these problems not only affects normal use, but also may have safety hazards. Therefore, it is crucial to carry out repairs in a timely manner.
3. Common faults and solutions.
1.Deformation of the door body: This is usually caused by loose screws or unstable foundations during installation. The solution is to readjust the screws to ensure that the door body is in a stable state and at the same time strengthen the foundation.
2.Poor switching: This can be caused by worn pulleys, insufficient lubrication. At this point, the pulley needs to be cleaned and the right amount of lubricating oil added to ensure its normal operation. If the problem persists, you may need to replace it with a new pulley.
3.Damaged rails: This will cause the door to not move properly. The solution is to replace the slide rails with new ones.
4.Damaged spring: This will cause the door to not close properly. At this point, it is necessary to replace the spring with a new one.
Fourth, how to carry out maintenance.
1.Observation: First of all, it is necessary to carefully observe the fault phenomenon and find out the root cause of the problem.
2.Tool preparation: Prepare the appropriate tools and materials, such as screwdrivers, lubricating oil, new pulleys, new springs, etc.
3.Disassembly: Disassemble the problematic parts in order and clean them.
4.Maintenance: Repair according to the fault phenomenon, such as replacing damaged parts, adding lubricating oil, etc.
5.Installation: Reinstall the parts in the order of disassembly to ensure that the screws are tightened and the slide rails are smooth.
6.Test: After confirming that the fault has been resolved, you can test to ensure that the door can be opened and closed normally.
7.Precautions: During the maintenance process, it is necessary to pay attention to safety and avoid accidental injury. At the same time, it is necessary to ensure the cleanliness of tools and materials to prevent secondary pollution.
5. Precautionary measures.
In addition to timely repairs, we can also take some precautions to reduce the occurrence of failures. For example:
1.Regular maintenance: Regularly maintain the color steel roller shutter to check whether the screws are tightened, whether the pulleys are worn, and whether the springs are aged.
2.Keep it clean: Regularly clean the door body and track to avoid dust and debris affecting its normal operation.
3.Reasonable installation: ensure that the foundation is stable and the screws are tightened to avoid deformation and failure caused by improper installation.
4.Pay attention to use: Pay attention to safety during use, avoid overload, impact and other behaviors to prevent accidents.
Summary: Zhongshan color steel roller shutter maintenance is an important job, master the relevant knowledge and skills, can easily deal with various failures. By taking preventive measures, the occurrence of failures can be reduced and the service life of the equipment can be extended. I hope this article can be helpful to you and keep your color steel roller shutter in good working condition.