As the core equipment of hydraulic equipment, mechanical engineering and mining machinery testing, the main responsibility of the brake hose burst strength testing machine is to strictly control the compressive strength of the brake hose. This testing machine has 0A wide range of test pressures from 1 to 40 MPa can be adapted to a wide range of needs. What's more worth mentioning is that the equipment supports multi-station testing, and each station operates independently without interfering with each other, which greatly improves the testing efficiency. 
The test process is carried out according to a specific method. First, the brake hose to be tested is connected to the testing machine, the gas is removed from the hose and pressurized with distilled water. After boosting to 28MPa 1MPa, hold the pressure for 120s 10s. After the packing is over, apply pressure at the boost rate at the time of pressurization to more than 345mpaćAfter this series of operations, the tested brake hose is carefully inspected and recorded for damage. 
In terms of technical parameters, the test pressure of the testing machine can be 0It can be adjusted freely from 1 to 40MPa, and it is highly adaptable. The driving air source is compressed air, and the pressure is 02 to 08MPa. The boost rate has reached an astonishing 100MPa min to 20MPa min, which greatly improves the test efficiency. In addition, the machine can be equipped with up to 1 to 8 test stations to meet the needs of high-volume testing. The test is carried out at room temperature, and the computer control mode is used to ensure the accuracy and reliability of the test.