Plastic particle moisture analyzer, plastic particle moisture meter, plastic particle moisture analyzer, plastic raw material moisture detector use 5-inch color touch screen as a display, which can clearly and accurately display the measurement data. Moreover, the display of the plastic particle moisture meter also has a built-in Chinese operation guide and voice reminder, so that the operation of the surveyor is more simple and clear, and there is no need to worry about not operating.
The plastic particle moisture tester is simple to operate, requires no special training, automatically determines whether the material is constant weight during the test, and automatically locks the moisture content percentage of the sample at the end of the measurement. The percentage of moisture content of the sample is automatically calculated by the instrument according to the mass loss of plastic particles before and after heating and the percentage of the original mass of the sample before heating. Compared with the traditional oven drying method, the measurement speed is faster, and more than a little faster, the test speed of the moisture tester will be several times or even dozens of times faster than the traditional oven method, and the test results of the moisture detector are almost close to the drying oven method, which largely meets the requirements of the rapid development of modern enterprises to quickly detect the moisture content of products.
The plastic particle moisture tester has a simple measurement operation, no manual calculation and fast test speed, and has gradually replaced the traditional oven drying method as the main means for enterprises to detect the moisture content of materials and products.
Application range of plastic particle moisture meter
The plastic particle moisture detector belongs to the heat drying loss on weight method moisture meter, which is suitable for almost all kinds of industries that need to detect the moisture content of materials, and has a wide range of applications. Plastic particle moisture meter is commonly used in PP plastics, PVC plastics, ABS plastics, PET plastics, PE plastics, polyurethane, resin, rubber, latex, silicone, masterbatch particles, emulsified asphalt, adhesives, automobile tires, wires and cables, polyamide profiles, fireproof materials, thermal insulation materials, refractory materials, wood-plastic composites, carbon fiber composites, plastic pipes, glass fibers, engineering plastics, modified plastics, automotive wiring harness plugs, plastic scraps and other materials moisture content detection.
Plastic particle moisture meterTechnical parameters
Instrument model: JF12031A
Weighing resolution: 0001g
Weighing threshold: 120g
Load cell: German HBM
Moisture content resolution: 001%
Moisture measurement range: 002%～99.99%
Temperature adjustment range: 45 200 , interval: 1
Sample volume: 20 30g
Data interface: RS232
Calibration method: single-point calibration.
Calibration weight: 100g
Data storage: 100 groups.
Heating source: annular 450W halogen lamp.
Heating method: mild, standard, fast
Shutdown mode: automatic, manual, timed.
Sample tray diameter: 90mm
The results show that the test temperature and time, moisture content, solid content, moisture regain, dynamic curve, etc.
Plastic particle moisture analyzerHow to use:
Take out the instrument host and accessories, load the heat gathering plate, triangle bracket, tray and sample tray into the host in turn to complete the installation, and then calibrate according to the instructions of the manual, and return the device to zero after the calibration is completed. In instrument 0In the state of 000g, take about 20g of plastic particles and put them in the sample tray, cover the heating chamber cover after evenly tiling, select the heating measurement after starting, and the instrument will automatically display the percentage of moisture content of the sample at the end of the test.