Recently, many friends have consulted the relevant content of the construction practice of the lead door in the CT room, and the following is a summary of the relevant knowledge points, I hope it will help you.
The construction of the lead door of the CT room is designed to protect personnel from radiation. The following is a brief introduction to the selection, design and installation steps of the lead door of the CT room to ensure a clear organization.
Selection: It is important to choose a lead door that is suitable for the CT room. In general, a lead material of moderate thickness should be selected as the body material of the door to provide sufficient radiation shielding effect. Choosing a door with the right thickness can also help reduce the weight of the door and ensure ease of installation and use.
Design: The following factors should be considered when designing the lead door of the CT room:
1. Size: According to the size of the CT room and the size of the door, determine the appropriate door size to ensure that the door can completely cover the door and prevent radiation leakage.
2.Structure: Reasonably designed structure to ensure the stability and tightness of the door. The door should be able to open and close, and be completely sealed when closed to prevent radiation leakage.
3.Specification: Determine the design requirements for the door according to the relevant radiation protection codes and standards to ensure that the door meets the safety requirements and provides adequate radiation shielding.
Installation: The installation of the lead door of the CT room needs to be carried out in strict accordance with the following steps:
1. Preparation: Clean the doorway area to ensure that there are no obstacles blocking the installation. Also check whether the dimensions and structure of the door are consistent with the design.
2.Install the door frame: Install the door frame and fix it to the wall or floor slab to ensure the stability of the door frame.
3.Install the door body: Install the door body to the door frame and make sure the door can open and close smoothly. Damage to the door should be avoided as much as possible during installation, so as not to affect the radiation shielding effect.
4.Testing and Adjustment: After installation, test the door to ensure its tightness and stability. If necessary, adjustments and corrections can be made until safety requirements are met.
The selection, design and installation steps of the lead door in the CT chamber are crucial, considering the radiation protection effect, the size and structure of the door, as well as the stability and tightness of the installation. Through the comprehensive consideration and reasonable arrangement of these factors, the effective operation and safe use of the lead door of the CT room can be ensured.