Dynamic ring monitoring and monitoring of the computer roomitIntegrated software and hardware O&M solutions
**: Easy Monitoring (Beijing Maxim Times).
The dynamic environment monitoring of the computer room is an important requirement in the context of digital transformation. With the deepening of informatization construction, the operating status and environmental parameters of the equipment in the computer room have an increasing impact on the stability and reliability of the whole system. Therefore, the need to control the operation status of equipment in the computer room in real time, integrate centralized operation and maintenance management, improve fault repair management, comprehensively grasp the assets of the computer room, and effectively assess the operation and maintenance work is becoming increasingly prominent. Through the construction of the power environment monitoring system of the computer room, real-time monitoring and alarm of the environmental parameters and equipment operation status of the computer room can be realized, improving the operation and maintenance efficiency and system stability, and providing a strong guarantee for digital transformation.
Performance characteristics: integrated centralized monitoring.
Strong mass surveillance capabilities.
It supports unified monitoring of various equipment in the computer room, environment, IT infrastructure, and Internet of ThingsIt is specially designed for high-frequency writing scenarios of O&M massive dataThe monitoring capacity of a single machine is 3-4 times that of similar productsOne platform for unified management to improve management efficiency. The distributed cluster architecture supports unlimited expansion of the monitoring scale.
Quickly locate faults and generate alarms.
Distributed multi-node unified management.
Visually and quickly locate equipment faultsMultiple ways to send alarm notifications in real time and accuratelyCombination policies can be used to filter non-critical alarms.
Support multi-data, multi-region, multi-level, cross-network gate, etc.;Multiple management scenarios, supporting different personnel permissions and multi-tenant management methods.
High performance and high availability.
Independent research and development is controllable.
Supports distributed big data and high-concurrency storageThe core database, middleware, webserver, etc. are all self-developedLoad balancing and dual-machine hot standby are supportedSupport the deployment of various localized environmentsThe underlying distributed components of the system occupy few network resources.
It can monitor all kinds of domestic equipment.
3D computer room management.
The dynamic environment monitoring of the computer room and the integrated operation and maintenance solution of IT software and hardware are recommended for easy monitoring. This product integrates IT infrastructure monitoring and computer room dynamic environment monitoring, and realizes a variety of product functions on one platform, with fast deployment, easy operation and stable performance. The monitoring is easy to realize 3D composition based on the user's computer room building, configure the network equipment and dynamic ring equipment according to the actual location, and display various key parameters in real time, including cabinets, equipment, power distribution cabinets, temperature sensors, humidity sensors, smoke sensors, air conditioners, UPS, batteries and other equipment, simulate each equipment and cabinet in the entire computer room, and realize the transparent management of WYSIWYG
Power monitoring: UPS, batteries, power distribution cabinets, generators, precision air conditioners and other environmental monitoring.
Security monitoring: cabinet micro-environment, water leakage detection, temperature, fresh fan and other security monitoring.
Fire monitoring: access control, audio system, anti-theft equipment, fire equipment management.
Asset management: Equipment assets, including equipment models, numbers, and spatial distribution locations.
Temperature and humidity monitoring.
The temperature and humidity of the computer room environment are monitored by collecting real-time data from temperature and humidity sensors. The temperature and humidity values of each area of the computer room can be displayed through a graphical interface.
Historical data curves can be generated so that O&M personnel can grasp the change trend.
When the temperature and humidity values reach the set thresholds, the system will automatically give an alarm.
Smoke fire monitoring.
Real-time monitoring of smoke detector output status changes.
Monitor the amount of change in the output status of the fire host. When the smoke concentration in the computer room is detected, the dry contact output interface of the smoke detector sends the alarm signal to the monitoring platform, and the monitoring platform automatically alarms.
Water leakage monitoring. Real-time monitoring of water leakage in the water source area in the computer room, and display the specific leakage location. By laying a regional leak detection sensor rope in the water source area such as the air conditioning outlet pipe and the water outlet pipe, the monitored liquid leakage signal is sent to the monitoring platform.
The monitoring platform provides a variety of alarm types according to the alarm configuration to notify the maintenance personnel of the failure of water leakage on site in time.
Low-voltage distribution monitoring.
Monitor the distribution parameters and status of low-voltage distribution cabinets;Monitor the on/off status of the power distribution switch.
By installing an intelligent power meter at the inlet of the distribution cabinet, the various power distribution parameters of the incoming line of the distribution cabinet are collected.
The power supply parameters are monitored through the fuel meterThe status signal of the power distribution switch is collected through the intelligent acquisition module.
UPS monitoring.
Real-time monitoring of UPS working status, voltage, current, frequency, power, backup time, etc. You can view the real-time running status, parameter data and alarm events of UPSYou can query historical curves and historical data in any time period.
It supports RS232 RS485 SNMP intelligent monitoring communication interface and RJ45TCP IP network communication protocol.
Battery monitoring.
Monitor the total voltage, cell voltage, cell temperature, cell internal resistance, charge and discharge current, etc.
The battery is equipped with a battery acquisition module and a communication management module, which can monitor the voltage, internal resistance and negative temperature of the battery.
Realize centralized real-time monitoring and fault warning notification, and timely detect abnormal phenomena such as battery aging, overload, and heating.
Precision air conditioning monitoring.
Monitor the operating parameters and status of precision air conditioners: on/off status, supply air temperature and humidity, return air temperature and humidity parameters, etc.
Recording detailed alarm status and historical records supports the export of historical record data, which is convenient for accident analysis and processing.
It supports RS232 RS485 SNMP intelligent monitoring communication interface and RJ45TCP IP network communication protocol.
Fresh air turbine monitoring.
Monitor the switching status, operation status and control operation mode of the new fanMonitor the supply air temperature, supply air relative humidity, room temperature, CO2 concentration, etc.
Through the monitoring and control auxiliary relay, single-way switch sensor, and micro differential pressure switch, the monitoring of the new fan is realized.
Provide detailed fault notification information.
Access control. Real-time monitoring of the status of the access control system, the status of opening and closing the door, and the entry and exit record information of the door.
Record, store and display information such as personnel access level and access time period setting.
It can obtain the alarm of forced entry by non-system authorized personnel and notify the management personnel to deal with it in time.
*Monitoring. Real-time monitoring of the best images of each camera in key areas;Realize the linkage function with access control monitoring, fire monitoring, etc.
Through the communication protocol of the camera (**server or DVR), the TCP IP network is used to call seamlessly.
Click on the 3D view to automatically retrieve the scene** image.
To sum up, the construction of the power environment monitoring system in the computer room is very important for digital transformation, which can improve the operation and maintenance efficiency and system stability, and provide a strong guarantee for the information construction of enterprises. Therefore, it is an important task to strengthen the construction and management of the power environment monitoring system in the computer room in the context of digital transformation.