There are many projects included in decoration, but when it comes to decoration, there are always a few projects that can be thought of first, such as "ground decoration" in the hard decoration construction link.
When it comes to the ground decoration plan, there is no doubt that there is always an AB choice question in front of everyone: "tile" or "wood floor"?
Because everyone's budget is different and their preferences are different, the decoration decision on the ground is naturally different. Some people prefer wooden floors, while others prefer tiles. In this issue of home furnishing special, I will focus on some things about ceramic tiles, and by the way, share the advantages and disadvantages of ceramic tiles and wooden floors. I hope to be able to bring you some references
Even if you don't work in the decoration industry, it is estimated that you have found an interesting phenomenon, that is, many families do not consider wood flooring when determining the ground decoration plan. After more than ten years of dealing with decoration, I have no scruples to say that at least seventy percent of ten families will choose to "lay tiles".
What is the charm of ceramic tiles that can make more and more families "circle fans"?
In fact, the reason behind it is not complicated. I believe that the following points will make us more clear:
There will be no concerns about the release of formaldehyde.
The advantage of wood flooring is that it feels good on the foot, while the disadvantage is that it is very distinct. The cost of "pure solid wood flooring" that does not release formaldehyde is too high, and the ** of five or six hundred yuan a piece discourages many people. And if you "give in" in the budget less, then the choice of laminate flooring will have concerns about formaldehyde.
It is undeniable that as long as it is laminate flooring, formaldehyde will be released, because glue will be added during the pressing process. It's just that the amount of glue added is different. Theoretically, the formaldehyde emission of three-layer parquet multi-layer parquet laminate flooring.
tiles, there will be no worries about the release of formaldehyde. This is an indisputable fact. So in order to avoid stepping on the pit, all things considered, it is obvious that tiles are more suitable.
Ceramic tiles are more advantageous in cost.
Although cement and sand are needed to lay tiles, it must be admitted that the quality of tiles is uneven, even if it is a tile of dozens of yuan, it can also meet the needs of paving. On the contrary, wood flooring is obviously not suitable if environmental protection is taken into account. So theoretically speaking, the cost of tiling is generally "controllable". And if the cost of wood flooring is controlled, environmental protection indicators will inevitably be sacrificed. You get what you pay for, and it's perfect for wooden flooring.
In the final analysis, a tile of tens of yuan can be used with confidence, but we need to put a question mark on the wooden floor of dozens of yuan.
After moving in, the tiles are more "resistant" and do not need to be maintained.
Ceramic tiles also have a recognized advantage over wood floors, which is that they are "more resistant to construction". Because the tiles are fired in a kiln, they are very hard. Whether it is a living room or a bedroom, when you move the furniture, you will find that as long as the tiles are laid, there will be no "scratching the ground".
After the wooden floor is laid, all the movements will become cautious. Because whether it is a solid wood floor or a laminate floor, its hardness cannot be compared with ceramic tiles.
And after moving in, you will know that the wooden floor needs to be maintained regularly to maintain its bright color. In addition, the state of the wooden floor is also affected by the indoor temperature and humidity. If it is exposed to high temperatures or moisture, it will cause the wooden floor to deform and even mold.
Whether it is pure solid wood flooring, solid wood parquet or laminate flooring, it is difficult to restore once it is deformed. But tiles don't have these problems.
There are many types of ceramic tiles, which are divided into porcelain tiles, polished tiles, glazed tiles, full-body bricks, rock slabs, microcement and so on. For these "definitions", in fact, as an owner, it is not necessary to understand them all, just remember to choose traditional glazed tiles. To tell the truth, don't choose any rock slabs and microcement tiles, I will talk about the chicken ribs of these two materials.
For most owners, "specs" always come first. According to the specifications, the common sizes on the market are divided into several kinds, floor tiles are: conventional 800 800 square tiles, 600 1200 tiles, 750 1500 tiles; Wall tiles are: 30 30 and 30 60 and so on.
Among them, in the choice of floor tiles, 800 800 square tiles and 750 1500 rectangular tiles are the two most widely paved at present. It is these two kinds of tiles that make many people unable to make up their minds for a while.
From the merchant's point of view, it is definitely for the owner to choose 750 1500 tiles, because this kind of tile is more expensive and more profitable than the regular 800 bricks. From the owner's point of view, the two types of bricks have their own advantages and disadvantages, and it is not that the larger the tile, the more worthy of investment.
First of all, it must be understood that no matter what the size of the tile, its quality is not related to the size, but to the construction process (press tonnage, tile raw materials, density, etc.). So it's not that bigger the size, the better the quality. As a person who has come over, I believe that the following summary will help you determine the purchase specifications of ceramic tiles:
The budget is sufficient to choose 750 1500 tiles.
Why are 750 1500 tiles more expensive than 800 800 tiles? In fact, the reason is very simple, because the area of a single tile in the former is almost twice as large as that of the latter. So the 750 1500 tiles on the market** are basically 2 times as much as the latter. If the budget is sufficient, it is advisable to give preference to large-gauge tiles. After all, let's be honest, larger tiles mean that there are "fewer gaps" in the ground with a fixed area, so the aesthetics will be higher.
Living room area larger than 30, preference is given to 750 1500 tiles.
For the living room of a small apartment, it is enough to choose 800 800 tiles, because the area is small, so the advantages of tiles of this specification are more obvious. And if the living room area is more than 30, then it is recommended that you choose 750 1500 tiles. After all, the ceramic tiles of this specification are more holistic and beautiful in large houses.
Of course, in addition to the 750 1500 tiles, you can also choose 600 1200 tiles. However, the latter is not as atmospheric as the former. So the market share of the latter is not high.
Off topic:
In fact, if the beauty seam is chosen properly, even if it is an 800 800 tile, the effect of paving is no worse than that of 750 1500. Because it is important to have the same color of the seam and the tile. For example, for light gray tiles, when choosing a beauty joint, it is best to choose light gray. Only in this way can the gaps between the tiles be "perfect**".
So, don't overlook the importance of sewing agents. In addition, the once smash hit local tyrant Jin Mei sewing agent is outdated, so choose a color similar to the tile so as not to overturn.
Although there are many families who choose tiles, it is undeniable that many families have paid IQ taxes on them. So let's focus on sharing a few "pit avoidance guides" for tile purchases, hoping to bring you some references:
Try not to choose Internet celebrity bricks.
As I mentioned above, try not to choose Internet celebrity tiles, such as rock slabs and "microcement" tiles. In fact, the reason is very simple, these two materials are not only costly, but also far less practical than ordinary glazed bricks.
Take "rock slab" as an example, I believe that people who know more about building materials know that the essence of rock slab is actually a kind of tile. It is just a special "formula" such as stone powder and quartz stone added to the raw materials of this tile, and then pressed by a press that is heavier than the tonnage of a tile press. So the slab can be thinner, denser and less absorbent.
But at the same time, the slabs have become brittle. (About "rock slabs", if you are interested, you can go to my homepage to see this topic).
To tell the truth again, there is really no difference between the rock slab and the ordinary glazed bricks on the ground, the foot feeling is no different at all, and the hardness is not felt. Moreover, the hardness of ordinary tiles is far from meeting the needs of home life.
Try not to choose tiles that are too expensive.
The price difference of ceramic tiles on the market is relatively large, with one or twenty yuan, one or two hundred yuan, and four or five hundred yuan. In general, most families will prefer less than 100 yuan. In fact, tiles at this price can fully guarantee the quality. But for tiles over 100 yuan, there is no need to consider it to be honest.
Because the water in the ceramic tile industry is very deep, the more expensive the tile, the higher the proportion of its "brand premium". That is to say, those first-line big-name tiles, we recognize its quality, but at the same time, we cannot deny that its advertising cost accounts for a high proportion.
Try not to choose tiles produced at the beginning of the year and at the end of the year.
In fact, only people in the industry know about this. When everyone is concerned about "water absorption", in fact, the production date is more critical. Because the water absorption rate is the consensus in the industry, and as long as it is not less than thirty or forty yuan, the water absorption rate is about the same. However, the production date directly determines the damage rate of ceramic tiles (from the perspective of ceramic tile factories, it is called "loss rate").
At the beginning of each year At the end of the year, the kiln where the tiles are fired is either in the period when it has just been ignited (the temperature is unstable), or it is in the period when the fire is about to be extinguished, so the tiles fired at this time are prone to cracks. Some cracks are not visible to the naked eye, but they will break if there is a slight external force.
Every year after March and April, until November, the temperature in the kiln is the most stable, so the fired bricks are also of the highest quality, and the defective products are the lowest.
Therefore, when buying ceramic tiles, after the decoration company delivers the tiles to your home, you must look at the production date of the tiles. Some decoration companies are afraid that the owner will know the inside story, so they will deduct the production date.
In addition to the above three points, there is another point to consider, that is, the slip resistance of the tile. If there are elderly people or children at home, you must not ignore the slip resistance. In addition, if you choose a tile with a pattern, remember to choose a tile produced "in the same batch", otherwise you will find that the pattern is asymmetrical after paving, and the effect will be ugly.