Amazon US Solid-State Fan Speed Controller UL1917 Test Report Standard 99 O Solid-State Fan Speed Controller If you want to be on Amazon, you must submit a UL1917 test report The solid-state fan speed control range includes:
The UL1917 standard covers solid-state speed controllers rated at speeds of 300 volts or less, single-phase, designed to connect to branch circuits from 15 to 20 amps, and installed in accordance with the National Electrical Code ANSI NFPA 70, and used with the following equipment:
a) Fans and blowers for circulating air, such as desks, stands, ceilings, scaffolding, pedestals and utility fans;
b) Ventilated fans and blowers, e.g. loft, wall-mounted, ceiling-mounted, domestic range hoods and canopies, as well as window sashes;
c) Evaporative coolers;
d) Air filters;
e) Fan-type deodorants;
f) Fan-type air fresheners.
The UL1917 standard covers both inductive and capacitive fan speed control.
The UL1917 standard includes a solid-state fan speed control section for controls, which includes dimmers for use with lighting fixtures.
The UL1917 standard also includes solid-state fan speed control included with the power cord, solid-state fan speed control for permanent connection, and direct-plugged devices.
The UL1917 standard does not include solid-state speed control for use with air heaters equipped with fans, heating ventilators, or blowers that include components of equipment such as electric furnaces, mechanical refrigeration equipment, air conditioners, or DC output equipment.
The UL1917 standard does not include solid-state speed control for fans used for:
a) For use in hazardous locations as defined in the National Electrical Code ANSI NFPA 70;
b) Installed on solvents or chemically flammable liquids or vapors;
c) Located in a chemically corrosive environment.
Information to be submitted for UL1917 test report of solid-state fan speed controller:
1.Product Name: Provide the full name of the product
2.Product model: list all the product models, varieties or classification numbers that need to be experimented.
3.Product nameplate: including product model, electrical parameters, manufacturer information, production date, UL logo.
4.Intended use of the product: Hypothesis: Appliance Commercial, Indoor, Outdoor, etc.
5.Parts list: Detail the parts and models (file numbers), ratings, and names of the manufacturers that make up the products.
6.Electrical properties: for electronic and electrical products. Provide electrical schematic diagram (circuit diagram), pcblayout
7.Structure diagram: For most products, the structure diagram or ** diagram of the product, ingredient list, etc. are required.
8.Product instruction manual and installation manual, etc
9.A special application form for a specific product.