Before you start reading this article, you may not know much about the construction sequence and specific practices of anchor bolt embedded plates, but after reading, you must have a deeper understanding of this.
The sequence and specific practice of anchor bolt embedded plate construction are as follows:
1. Ground preparation: First of all, you need to clean the ground at the construction site and ensure that the ground is flat, dry and free of debris.
2.Embedded plate installation: according to the design requirements, mark the line on the ground according to a certain layout density, and then dig the pit of the corresponding depth and diameter at the marking.
3.Install the foundation reinforcement: install the pre-designed reinforcement in the pit, pay attention to the position and spacing of the reinforcement should meet the design requirements, and use the reinforcement connector to fix the reinforcement together.
4.Pit edge treatment: The pit edge can be reinforced, and concrete pouring or masonry around the embedded slab can be used.
5.Embedded plate installation: Place the embedded plate in the pit, ensure that the embedded plate is flush with the ground, and adjust it using a level.
6.Fix the embedded plate: use bolts or welding to connect and fix the embedded plate with the foundation reinforcement.
7.After passing the acceptance, the follow-up concrete pouring work can be carried out.
There are two common practices for fixing and connecting anchor bolt embedded plates, namely bolt fixing and welding fixing.
1. Bolt fixing: At the part of the anchor bolt and the reserved hole of the anchor bolt embedded plate, use bolts to connect and fix it to ensure that the contact between the bolt and the embedded plate is firm.
2.Welding fixation: polish the anchor bolt and the part of the reserved hole of the anchor bolt embedded plate, and then use electric welding to connect and fix it to ensure that the welding place is firm and reliable.
In the process of embedded plate construction, it is necessary to pay attention to the quality of fixing and connection, and ensure that the connection between the anchor bolt and the embedded plate is firm to ensure the stability and safety of the whole structure. At the same time, it is necessary to keep the organization clear and carry out the construction in accordance with the design requirements to avoid quality problems.