A portable mobile water bladder is a portable water storage device that is suitable for outdoor activities, camping, hiking, and other occasions. Here are the steps to operate a portable mobile water bladder:
Preparation: aMake sure the water bladder is clean and hygienic and free of odors or dirt.
b.Check the tightness of the water bladder to make sure there are no water leaks.
c.Check that the suction tube of the water bladder is intact.
2.Wash the bladder:
a.Open the lid of the bladder and remove the suction tube inside.
b.Wash the inner and outer surfaces of the bladder with warm water and a mild detergent.
c.Rinse well with clean water to make sure no detergent remains.
d.Dry the water bladder with a clean towel.
3.Filling the water bladder:
a.Open the lid of the water bladder and place the suction tube into clean tap or drinking water.
b.Press and hold the bottom of the bladder and slowly turn the bladder upside down to allow the water to flow naturally into the bladder.
c.Once the bladder is filled, take out the suction tube and make sure the lid of the bladder is tightly closed.
4.Carry a water bladder:
a.Place the water bladder in a dedicated water bladder bag or backpack compartment.
b.Make sure that the bladder compartment of the water bladder bag or backpack is airtight to prevent the water bladder from leaking.
c.Carry a water bladder or backpack over your shoulders for comfort and stability.
5.Use a water bladder:
a.Open the lid of the water bladder and pull the suction tube out.
b.Place the mouth of the suction tube into your mouth and gently absorb the water.
c.Control the rate and amount of water you absorb to avoid choking or wasting water.
d.After drinking the water, place the suction tube back into the water bladder and make sure the lid is tightly closed.
6.Wash the bladder:
a.Use clean tap or drinking water to rinse the inside and outside of the water bladder.
b.Rinse thoroughly with clean water, making sure there is no residual water or detergent.
c.Dry the water bladder with a clean towel to make sure there is no standing water.
7.Storage of water bladders:
a.Dry the water bladder completely, making sure there are no wet places.
b.Open the lid of the bladder to keep it ventilated and prevent mold or odors.
c.Place the water bladder in a dry, cool place away from direct sunlight.
The above is the operation procedure of the portable mobile water bladder. When using water bladders, ensure the safety and hygiene of water sources and avoid drinking untreated water sources. During use, clean and maintain the water bladder in time to ensure the safety and hygiene of use.