1. SKD11 die steel can work for a long time at high temperature after heat treatment, and it also has good polishing performance and wear resistance under high temperature. Qiaoxi SKD11 die steel is a high-precision synthetic material, which is a material synthesized from a variety of chemical elements, with a very uniform structure and good synthetic toughness.
2. SKD11 is a Japanese grade relative to the Chinese material is CR12MOV CR12MOV steel has high hardenability, the cross-section of 300 400 or less can be fully quenched, at 300 400 can still maintain goodness and wear resistance, toughness is higher than CR1 steel, and the volume change is minimal during quenching.
3. Material: SKD11 can be replaced with what material CR12 steel or CR12MOV steel can be, quenching hardness HRC5660. If it is too high, the tool can easily break.
SDK11 is a Japanese brand, which is replaced by domestic CR12 or CR12MOV, but the toughness and wear resistance ratio of CR12 are not CR12MOV, so it is better to use CR12MOV as a cutting blade.
4. What material can be used to replace SKD11? Aluminum alloy, copper alloy, titanium alloy, tempered glass and other materials are also usually fixed, CR12 steel or CR12MOV steel, quenching hardness HRC56-60, the cutter is too high and easy to break, steel quenching is to heat the steel to a critical temperature AC or A, keep warm for a period of time, so that it is fully or partially austenitized.
5. In the process of quenching and tempering, the hardness of SKD11 can reach 60-62HRC, which can ensure that it has excellent cutting performance and wear resistance. With the continuous development of science and technology, SKD11 has been continuously optimized and upgraded, such as SKD11S, SKD11E, SKD11G, etc., which can meet the needs of different fields.
1. SKD11 is a high-quality cold work tool steel, also known as D2 steel. It is a high-carbon and high-chromium steel developed by Daido Steel Company of Japan, and its chemical composition includes 13% to 15% chromium, 8% to 2% carbon, 2% to 6% silicon, 3% to 0% molybdenum and less than 2% manganese, phosphorus, sulfur and other elements.
2. SKD11 is a tool steel material, and the corresponding grade is: D2 steel.
It has excellent wear resistance and hardness, and is widely used in the manufacture of cold stamping dies, hot stamping dies, stamping dies, plastic molds and other fields. The chemical composition of SKD11 steel includes elements such as carbon, silicon, manganese, phosphorus, sulfur, chromium, molybdenum, and cobalt.
3. SKD11 is a kind of high-carbon and high-chromium cold work die steel, which is improved from Japanese D2. It has excellent wear and corrosion resistance, making it one of the ideal materials for making molds and tools.
4. SKD11 leinite steel, which is a magical material, it has high hardenability, hardening and high wear resistance, not only that, it also has the characteristics of high temperature oxidation resistance and small heat treatment deformation.
5. SKD11 is a Japanese grade relative to the Chinese material is CR12MOV CR12MOV steel has high hardenability, the cross-section of 300 400 or less can be fully quenched, at 300 400 can still maintain good quality and wear resistance, toughness is higher than CR1 steel, and the volume change is minimal during quenching.
6. SKD11 is a high-carbon and high-chromium alloy tool steel.
SKD11 is a general cold work die steel with high wear resistance and toughness, high carbon and high chromium alloy tool steel and vacuum degassing refined steel, with pure steel quality, good hardenability and good hardenability with good hardenability and low quenching deformation.