Cotton stalk carbonization machine carbonization equipment process
1.When the carbonizer just starts heating (feeding), a heat source is needed to heat the carbonizer.
The first is to use the hot air flow generated by the reverberatory furnace for combustion and carbonization to achieve the purpose of heating and carbonization.
The other is to use the gasifier device to ignite the straw gas through the gasifier, and the combustible gas produced by the gasification is burned for carbonization to achieve the purpose of heating carbonization (the gasified straw becomes carbonized carbon powder through the carbonization carbon powder output device, and the combustible gas passes through the wood tar **device).
2.When the carbonization temperature reaches a certain temperature, the combustible gas is separated by the dust separator, and the combustible gas after dust separation passes through the wood tar device.
3.After carbonization and heating of self-produced gas, the reverberatory furnace heating or gasifier gas production device stops working, and the preliminary heating equipment ends.
4.Carbonization is about 0After 5-1 hours (time and temperature are different), the carbon powder slowly flows from the carbonization into the carbonized carbon powder cooler and flows out from the cooler. The production of the equipment is normal and can be continuously discharged.
5.Wood tar is an important chemical raw material, containing more than 300 chemical elements, and the equipment will automatically discharge wood tar.