How to disassemble aluminum alloy doors and windows, doors and windows are all required to be installed in the building, there are many types of doors and windows on the market today, and aluminum alloy doors and windows are a very good door and window. Aluminum alloy doors and windows are widely used in modern homes, but in some cases, such as replacing accessories, repairing or redecorating, we may need to disassemble these doors and windows.
1. Preparations.
Before you start dismantling, make sure you have the following tools ready: screwdrivers, wrenches, hammers, hand saws, etc. In addition, to ensure safety, it is recommended to operate on a solid flat surface and ensure that the work area is clean and tidy.
Second, the disassembly steps.
Observe and mark: First of all, carefully observe the structure of aluminum alloy doors and windows, especially the parts of screws and fixings. Mark the location that needs to be disassembled with a pen so that the relevant parts can be found and disassembled more quickly.
Remove accessories from windows and doors, such as doorknobs, sash locks, etc., which are usually secured by screws. After unscrewing the screws, gently remove the attachment and take care of the small parts to avoid loss.
Remove the glass: If you need to remove the glass, remove it first. Typically, the edges of the glass will be held in place by beads or gussets, and you can use a screwdriver or small hammer to pry these parts open and slowly remove the glass from the window and door frames.
Disassembling the sash: The sash usually consists of pulleys at the upper and lower ends and an axis in the middle. Loosen the screws on the pulley and remove the pulley from the track. Then, gently move along the sash track to remove the sash from the door and window frame.
Remove the frame: Use a wrench or screwdriver to loosen the screws on the window and door frames, then carefully remove the frame from the wall. Please note that balance should be maintained during the disassembly process to avoid damage or accidents caused by sudden detachment of the frame.
Cleaning and inspection: After the disassembly is complete, clean the site and inspect the door and window parts for damage or wear. If necessary, damaged parts can be replaced to ensure the quality of subsequent installations.
The dismantling of aluminum alloy doors and windows requires a certain amount of patience and care, and following the correct steps and precautions can ensure that the dismantling process goes smoothly and avoid damage to the door and window components.